Amplifier Research 15S4G8A The Amplifier Research 15S4G8A is a self-contained, air-cooled, broadband amplifier designed for applications that require instantaneous bandwidth and high gain. It is housed in a stylish cabinet and designed for benchtop use, but can be removed for equipment rack mounting.Features and Specifications of the Amplifier Research 15S4G8A Amplifier include:

Features:

• Provides a minimum of 15 watts of RF power when used with a sweep generator
• Front panel gain control provides convenience of setting desired output level
• RF input leveling circuit:
• Protects the amplifier from RF input overdrive
• Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
• RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them 
• Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs
• Digital control for both local and remote control of the amplifier
• Control System is a 16-bit RISC microcontroller board:
• Handles primary functions of the amplifier
• Interprets commands sent to it from an 8-bit remote interface board:
• 8-bit microprocessor controlled board provides IEEE-488 (GPIB) and RS-232 control of all amplifier functions
• Expandable power technology provides upgradability

Specifications:

• Rated output power:  15 watts minimum
• Power output @ 3dB compression:
• Nominal:  19 watts
• Minimum:  16 watts
• Power output @ 1dB compression:
• Nominal:  16 watts
• Minimum:  14 watts
• Flatness:
• typical:  ±1.0 dB
• maximum:  ±2.0 dB
• Frequency response:  4.0 – 8.0 GHz instantaneously
• Input for rate output:  1.0 milliwatt maximum, 0 dBm
• Gain (at maximum setting):  42 dB minimum
• Gain adjustment (continuous range):  10 dB minimum
• Input impedance:  50 ohms, VSWR 2.5:1 maximum
• Output impedance:  50 ohms nominal
• Mismatch tolerance:  
• 100% of rated power without foldback
• Will operate without damage or oscillation with any magnitude and phase of source and load impedance
• Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
• Harmonic distortion:  Minus 20 dBc maximum at 15 watts
• Third order intercept point:  51 dBm typical
• Noise figure:  10 dB typical
• Primary power (selected automatically): 
• 90-132, 180-264 VAC
• 50/60 Hz, single phase
• Connectors:
• RF:
• Input:  Type N female on front panel
• Output:  Type N female on front panel
• Remote Interfaces:
• IEEE-488:  24 pin
• RS-232:  9 pin subminiature D (female)
• RS-232 (Fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45
• Safety Interlock:  15 pin subminiature D
• Cooling:  Forced air (self contained fans) 

Provides a minimum of 15 watts of RF power when used with a sweep generator

Front panel gain control provides convenience of setting desired output level

RF input leveling circuit:

• Protects the amplifier from RF input overdrive
• Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm

RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them 

Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs

Digital control for both local and remote control of the amplifier

Control System is a 16-bit RISC microcontroller board:

• Handles primary functions of the amplifier
• Interprets commands sent to it from an 8-bit remote interface board:
• 8-bit microprocessor controlled board provides IEEE-488 (GPIB) and RS-232 control of all amplifier functions

Expandable power technology provides upgradability

Protects the amplifier from RF input overdrive

Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm

Handles primary functions of the amplifier

Interprets commands sent to it from an 8-bit remote interface board:

• 8-bit microprocessor controlled board provides IEEE-488 (GPIB) and RS-232 control of all amplifier functions

8-bit microprocessor controlled board provides IEEE-488 (GPIB) and RS-232 control of all amplifier functions

Rated output power:  15 watts minimum

Power output @ 3dB compression:

• Nominal:  19 watts
• Minimum:  16 watts

Power output @ 1dB compression:

• Nominal:  16 watts
• Minimum:  14 watts

Flatness:

• typical:  ±1.0 dB
• maximum:  ±2.0 dB

Frequency response:  4.0 – 8.0 GHz instantaneously

Input for rate output:  1.0 milliwatt maximum, 0 dBm

Gain (at maximum setting):  42 dB minimum

Gain adjustment (continuous range):  10 dB minimum

Input impedance:  50 ohms, VSWR 2.5:1 maximum

Output impedance:  50 ohms nominal

Mismatch tolerance:  

• 100% of rated power without foldback
• Will operate without damage or oscillation with any magnitude and phase of source and load impedance

Modulation capability:  Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal

Harmonic distortion:  Minus 20 dBc maximum at 15 watts

Third order intercept point:  51 dBm typical

Noise figure:  10 dB typical

Primary power (selected automatically): 

• 90-132, 180-264 VAC
• 50/60 Hz, single phase

Connectors:

• RF:
• Input:  Type N female on front panel
• Output:  Type N female on front panel
• Remote Interfaces:
• IEEE-488:  24 pin
• RS-232:  9 pin subminiature D (female)
• RS-232 (Fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45

Safety Interlock:  15 pin subminiature D

Cooling:  Forced air (self contained fans) 

Nominal:  19 watts

Minimum:  16 watts

Nominal:  16 watts

Minimum:  14 watts

typical:  ±1.0 dB

maximum:  ±2.0 dB

100% of rated power without foldback

Will operate without damage or oscillation with any magnitude and phase of source and load impedance

90-132, 180-264 VAC

50/60 Hz, single phase

RF:

• Input:  Type N female on front panel
• Output:  Type N female on front panel

Remote Interfaces:

• IEEE-488:  24 pin
• RS-232:  9 pin subminiature D (female)
• RS-232 (Fiber-optic):  Type ST
• USB 2.0:  Type B
• Ethernet:  RJ-45

Input:  Type N female on front panel

Output:  Type N female on front panel

IEEE-488:  24 pin

RS-232:  9 pin subminiature D (female)

RS-232 (Fiber-optic):  Type ST

USB 2.0:  Type B

Ethernet:  RJ-45

    

• Amplifier Research 15S4G8A - Datasheet (50 Ko)