Home » Boutique » Remis à neuf » RF Amplificateur » Amplifier Research 200TR4G8

Amplifier Research 200TR4G8

Amplificateur RF 4 – 8 GHz 200W

Fabricant:
Modèle: Amplifier Research 200TR4G8
Description: Amplificateur RF 4 - 8 GHz 200W
Fiche technique PDF: Amplifier Research 200TR4G8
Add to Quote Cart
Cart updated.
Continue shopping
or
go to your quote cart

AR 200TR4G8 (call for availability)The Amplifier Research (AR) 200TR4G8  is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier designed for applications where instantaneous bandwidth and high gain are required. A reliable TWT provides a conservative 200 watts minimum at the amplifier output connector. Stated power specifications are at the fundamental frequency.The AR 200TR4G8 Amplifier’s front panel digital display shows forward and reflected output plus extensive system status information accessed through a series of menus via soft keys. Status indicators include power on, warm-up, standby, operate, faults, excess reflected power warning and remote. Standard features include a built-in IEEE-488 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix cur, cathode voltage, collector voltage, heater cur, heater voltage, baseplate temperature and cabinet temperature.The modular design of the AR 200TR4G8 Amplifier’s power supply and RF components allow for easy access and repair. Use of a switching mode power supply results in significant weight reduction.The AR 200TR4G8 Amplifier is designed for 19 inch rack mounting, offers four side mounted carry handles, plus non-slip feet for bench top use. The AR 200TR4G8 Amplifier provides  readily available RF power for a variety of applications in Test and  measurement, (including EMC RF susceptibility testing), Industrial and University Research and Development, and Service applications.Features and Specifications of the AR 200TR4G8 Amplifier include:

  • Power (fundamental), CW, @ Output Connector:
    • Nominal: 262 watts
    • Minimum: 200 watts
  • Flatness: ±12 dB maximum
  • Frequency Response: 4-8 GHz instantaneously
  • Input for Rated Output: 1.0 milliwatt maximum
  • Gain (at maximum setting): 53 dB minimum
  • Gain Adjustment (continuous range): 35 dB minimum
  • Input Impedance: 50 ohms, VSWR 2.0:1 maximum
  • Output Impedance: 50 ohms, VSWR 2.5:1 typical
  • Mismatch Tolerance: Output power foldback protection at reflected power exceeding 40 watts. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. May oscillate with unshielded open due to coupling to input. Should not be tested with connector off.
  • Modulation Capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal. AM peak envelope power limited to specified power.
  • Noise Power Density: Minus 64 dBm/Hz maximum, Minus 70 dBm/Hz typical
  • Harmonic Distortion: Minus 4 dBc maximum, minus 7 dBc typical
  • Primary Power: 190-260 VAC, 50/60 Hz single phase, 2 KVA maximum
  • Connectors:
    • RF input: Type N female on rear panel
    • RF output: Type N female on rear panel
    • RF output sample port: Type N female on rear panel
    • GPIB: IEEE-488 (f) on rear panel
    • Interlock: DB-15 (f) on rear panel
  • Cooling: Forced air (self-contained fans), air entry and exit in rear.
  • Nominal: 262 watts
  • Minimum: 200 watts
  • RF input: Type N female on rear panel
  • RF output: Type N female on rear panel
  • RF output sample port: Type N female on rear panel
  • GPIB: IEEE-488 (f) on rear panel
  • Interlock: DB-15 (f) on rear panel

    •     

    Amplifier Research 200TR4G8 Product Overview