Teledyne LeCroy ZD200The ZD200 diffeial probes provides excellent noise and loading performance with an extensive set of probe tips, leads, and ground accessories to handle a wide range of probing scenarios.The ZD200 probes provide a wide dynamic range of ±20 V and a common mode rage of ±60 V to allow a broad application use. With theTeledyne LeCroy ZD200’s ProBus interface, the ZD200 becomes an dynamic part of the Oscilloscope. The ZD200’s probe sensitivity and offset are automatically optimized based on the Oscilloscope gain settings, so control is translucent to the user. When used with a Teledyne LeCroy digital Oscilloscope, no external power supply is required. Engineers often need to probe a variety of diffe test points in confined spaces. The extensive range of standard and optional tip accessories for the ZD200 ensures that this probe can meet any difficult probing challenge. Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The Teledyne LeCroy ZD200 accessories are engineered to provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads.Teledyne LeCroy ZD200 key features and specifications:

• 75 ns

• 10x

• 1%

• < 2 mV

• 3 mVrms

• ± 20 V

• ± 60 V

• 80 dB @ 60 Hz
• 50 dB@10 MHz

• 250 kΩ (Common Mode)
• 1 MΩ (Diffeial Mode)

• 3.5 pF

• Teladyne LeCroy ZD200 - Datasheet (1 MB)