Advantest
Advantest R3754A
10kHz to 150MHz Network Analyser
300 kHz to 3 GHz Frequency Range
120 dB Dynamic Range
-50 dBm to +10 dBm Output Power Range
S11, S21, S12, S22 (Full 2-Port S-Parameters) Measurement Parameters
10 Hz to 30 kHz IF Bandwidth
| Attribute | Value |
|---|---|
| Frequency Range | 300 kHz to 3 GHz |
| Dynamic Range | 120 dB |
| Output Power Range | -50 dBm to +10 dBm |
| Measurement Parameters | S11, S21, S12, S22 (Full 2-Port S-Parameters) |
| IF Bandwidth | 10 Hz to 30 kHz |
| Number of Data Points | Up to 1601 points per sweep |
| Impedance | 50 Ohm |
| Connector Type | N-Type (50 Ohm) |
| Display | 10.4-inch Color LCD |
| Interface | GPIB, RS-232C |
| Model | R3754A |
|---|
The Advantest R3754A is a 10 kHz to 150 MHz Vector Network Analyzer.
Key Features
Frequency Accuracy: 0.0005%
Frequency Range: 10 kHz ? 150 MHz
Output Impedance: 50 ohms
Output Power Range: 0.0005 mW ? 125.89 mW
Sweep Range: 0.1dB
The Advantest R3754A is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident signal, separating the transmitted and reflected waves, and then performing ratios that are directly related to the reflection and transmission coefficients of the two-port. Frequency is swept to rapidly obtain amplitude and phase information over a band of frequencies of interest. The R3754A utilize synthesized-frequency sources to provide a known test stimulus that can sweep across a range of frequencies or power levels. Advantest R3754A network analyzers also can perform ratioed measurements (including phase), which require multiple receivers. The R3754A can provide a wealth of knowledge about a device under test (DUT), including its magnitude, phase, and group-delay response.
