DE
IT
ES
FR
PL
Amplifier Research 175S1G4
| Manufacturer | Amplifier Research |
| Model | 175S1G4 |
| Product | RF Amplifier 0.8 GHz - 4.2 GHz 175W |
SKU
119142
Amplifier Research 175S1G4 The Amplifier Research 175S1G4 is a portable, self-contained, air-cooled, broadband, and completely solid-state ampifier designed for applications that require instantaneous bandwidth, high gain, and linearity. Its push-pull circuitry is utilized in all power stages lowering distortion and improving stability.Features and Specifications of the Amplifier Research 175S1G4 Amplifier include: Features: Specifications: Provides a minimum of 175 watts of RF power when used with a sweep generator Digital Control Panel (DCP): Gain control and RF output level protection All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet Bus interface connector on back panel Keylock on front panel assures positive control of local or remote operation Low level of spurious signals and linearity make it ideal for these various uses: Provides both local and remote control of the amplifier Uses a digital display: Uses menu assigned softkeys Uses a single rotary knob Uses four dedicated switches: POWER, STANDBY, OPERATE, and FAULT/RESET Offers extensive control and status reporting capability Provides operational presentation of Forward Power and Reflected Power Provides control status Provides reports of internal amplifier status A driver amplifier in testing wireless and communication components and subsystems A test instrument covering multiple frequency bands For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc. For EMC Test applications where undistorted modulation envelopes are needed Rated power output: 175 watts minimum Input for rated output: 1.0 milliwatt maximum Power output @ 3dB compression: Power output @ 1dB compression: Flatness: Frequency response: 0.8 – 4.2 GHz instantaneously Gain (at maximum setting): 52.5 dB minimum Gain adjustment (continuous range): 15 dB minimum (4096 steps remote) Input impedance: 50 ohms, VSWR 2.0:1 maximum RF power display: 0-200 watts Output impedance: 50 ohms, nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Third order intercept point: 61 dBm typical Harmonic distortion: Minus 20 dBc maximum at 160 watts Spurious: Minus 73 dBc typical Phase Linearity: ±1.0 deg/100 MHz, typical Primary power (selected automatically): Connectors: Safety interlock: 15 Pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 190 watts Minimum: 160 watts Nominal: 165 watts Minimum: 135 watts Typical: ±1.5 dB Maximum: ±2.0 dB 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance 90-132, 180-264 VAC 50/60 Hz, single phase 1050 watts maximum RF: Type N female Remote interfaces: IEEE-488: 24 pin RS-232: 9 pin Subminiature D RS-232 (fiber optic): Type ST USB 2.0: Type B Ethernet: RJ-45
- Provides a minimum of 175 watts of RF power when used with a sweep generator
- Digital Control Panel (DCP):
- Provides both local and remote control of the amplifier
- Uses a digital display:
- Provides operational presentation of Forward Power and Reflected Power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses four dedicated switches: POWER, STANDBY, OPERATE, and FAULT/RESET
- Offers extensive control and status reporting capability
- Gain control and RF output level protection
- All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
- Bus interface connector on back panel
- Keylock on front panel assures positive control of local or remote operation
- Low level of spurious signals and linearity make it ideal for these various uses:
- A driver amplifier in testing wireless and communication components and subsystems
- A test instrument covering multiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- For EMC Test applications where undistorted modulation envelopes are needed
- Rated power output: 175 watts minimum
- Input for rated output: 1.0 milliwatt maximum
- Power output @ 3dB compression:
- Nominal: 190 watts
- Minimum: 160 watts
- Power output @ 1dB compression:
- Nominal: 165 watts
- Minimum: 135 watts
- Flatness:
- Typical: ±1.5 dB
- Maximum: ±2.0 dB
- Frequency response: 0.8 – 4.2 GHz instantaneously
- Gain (at maximum setting): 52.5 dB minimum
- Gain adjustment (continuous range): 15 dB minimum (4096 steps remote)
- Input impedance: 50 ohms, VSWR 2.0:1 maximum
- RF power display: 0-200 watts
- Output impedance: 50 ohms, nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Third order intercept point: 61 dBm typical
- Harmonic distortion: Minus 20 dBc maximum at 160 watts
- Spurious: Minus 73 dBc typical
- Phase Linearity: ±1.0 deg/100 MHz, typical
- Primary power (selected automatically):
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 1050 watts maximum
- Connectors:
- RF: Type N female
- Remote interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety interlock: 15 Pin Subminiature D
- Cooling: Forced air (self contained fans)
- Provides both local and remote control of the amplifier
- Uses a digital display:
- Provides operational presentation of Forward Power and Reflected Power
- Provides control status
- Provides reports of internal amplifier status
- Uses menu assigned softkeys
- Uses a single rotary knob
- Uses four dedicated switches: POWER, STANDBY, OPERATE, and FAULT/RESET
- Offers extensive control and status reporting capability
- A driver amplifier in testing wireless and communication components and subsystems
- A test instrument covering multiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- For EMC Test applications where undistorted modulation envelopes are needed
- Provides operational presentation of Forward Power and Reflected Power
- Provides control status
- Provides reports of internal amplifier status
- Nominal: 190 watts
- Minimum: 160 watts
- Nominal: 165 watts
- Minimum: 135 watts
- Typical: ±1.5 dB
- Maximum: ±2.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 1050 watts maximum
- RF: Type N female
- Remote interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Returns
If you are not completely satisfied with your purchase, simply return the item to us in its original condition within 30 days of receipt.
Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund on receipt, excluding the original delivery charge. Alternatively, if preferred, we will exchange the item.
VAT
Prices exclude VAT. Intra-Community transactions: Under the EU VAT Directive, B2B sales of goods across EU VAT borders is VAT zero-rated.
Where VAT is charged, a rate of 23% is applied.
VAT is not charged outside of the EU.
