DE
IT
ES
FR
PL
My Quote
You have no items in your quote cart.
+44 (0)1582 323012
Currency
Language 
EN
EN
Amplifier Research 200S1G6
| Manufacturer | Amplifier Research |
| Model | 200S1G6 |
| Product | Broadband Amplifier 0.7 GHz - 6 GHz 200W |
SKU
119262
Amplifier Research 200S1G6 BROADBAND AMPLIFIER The Amplifier Research 200S1G6 is a solid state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting. Features and Specifications of the AR 200S1G6 Amplifier include:Features: When used with a sweep generator, provides a minimum of 200 watts of RF power Front panel gain control allows convenience of setting desired output level Protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm Stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure Digital display on front panel indicates operate status and fault conditions if an over-temperature or power supply fault has occurred Unit can be returned to operate when the condition has been cleared All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB and Ethernet Bus interface connector is located on back panel Local/Remote switch on front panel assures postive control of local or remote operation Applications: Low level of spurious signals and linearity make amplifier ideal for use as a driver amplifier in testing wireless and communication components and subsystems Can be used as a test instrument covering multiple frequency bands Suitable for a variety of communication technologies including CDMA, W-CDMA, TDMA and GSM Suitable for EMC Test application where undistorted modulation envelopes are desired Specifications: Rated power output: 200 watts minimum (0.7-6.0 GHz) Input for rated output: 1.0 milliwatt maximum Power output @ 3dB compression: Power output @ 1dB compression: Small signal gain flatness: Frequency response: 0.7 - 6 GHz instantaneously Gain (at maximum setting): 54 dB minimum Gain adustment: (Continuous Range) Input impedance: 50 ohms, VSWR 2.0:1 maximum Output impedance: 50 ohms, nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Third order intercept: 60 db typical Noise figure: 10 dB typical Harmonic distortion: Spurious: Minus 73 dbc typical Phase linearity: ± 1.0 deg/100 MHz typical Primary power: (Selected Automatically) Connectors: Safety interlock: 15 pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 220 watts Minimum: 180 watts Nominal: 180 watts Minimum: 160 watts Typical: ±1.5 dB Maximum: ±2.5 dB 10 dB minimum (4096 steps remote) 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance Minus 20 dBc maximum at 180 watts (1.0-6.0 GHz) Minus 15 dBc typical at 180 watts (0.7-1.0 GHz) 90-132, 180-264 VAC 50/60 Hz, single phase 1900 watts maximum RF: Type N female Remote Interfaces: IEEE-488: 24 pin RS-232: 9 pin Subminiature D RS-232 (fiber optic): Type ST USB 2.0: Type B Ethernet: RJ-45
- Low level of spurious signals and linearity make amplifier ideal for use as a driver amplifier in testing wireless and communication components and subsystems
- Can be used as a test instrument covering multiple frequency bands
- Suitable for a variety of communication technologies including CDMA, W-CDMA, TDMA and GSM
- Suitable for EMC Test application where undistorted modulation envelopes are desired
- Nominal: 220 watts
- Minimum: 180 watts
- Nominal: 180 watts
- Minimum: 160 watts
- Typical: ±1.5 dB
- Maximum: ±2.5 dB
- 10 dB minimum (4096 steps remote)
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Minus 20 dBc maximum at 180 watts (1.0-6.0 GHz)
- Minus 15 dBc typical at 180 watts (0.7-1.0 GHz)
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 1900 watts maximum
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
