DE
IT
ES
FR
PL
Amplifier Research 20S1G4
| Manufacturer | Amplifier Research |
| Model | 20S1G4 |
| Product | RF Amplifier 0.7 - 4.2 GHz 20W |
| Type | Used |
SKU
119316
Amplifier Research 20S1G4 The Amplifier Research 20S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. It is housed in a stylish cabinet and designed for
benchtop use, but can also be removed for immediate equipment rack mounting.Features and Specifications of the Amplifier Research 20S1G4 include:Features: Specifications: Provides a minimum of 20 watts of RF power when used with a sweep generator RF input leveling circuit: RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure Digital display on the front panel indicates the operate status and fault conditions when an over-temperature or power supply fault has occurred Digital control for both local and remote control of the amplifier All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet Bus interface connector on back panel Local/Remote switch on front panel assures positive control of local or remote operation Controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm Protects the amplifier from RF input overdrive Rated power output: 20 watts minimum Power Output@ 3dB compression: Power Output@ 1dB compression: Flatness: Frequency response: 0.7 – 4.2GHz instantaneously Input for rated output: 1.0 milliwatt maximum Gain (at maximum setting): 43 dB minimum Gain adjustment (continuous range): 10 dB minimum (4096 steps remote) Input impedance: 50 ohms, VSWR 2.0:1 maximum Output impedance: 50 ohms, nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Harmonic distortion: Minus 20 dBc maximum at 20 watts Spurious: Minus 73 dBc typical Third order intercept point: 52 dBm typical Noise figure: 10 dB typical Primary power (selected automatically): Connectors: Safety interlock: 15 Pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 25 watts Minimum: 20 watts Nominal: 22 watts Minimum: 18 watts Typical: ±1.5 dB Maximum: ±2.0 dB 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance 90-132, 180-264 VAC 50/60 Hz, single phase 210 watts maximum RF: Type N female Remote interfaces: IEEE-488: 24 pin female RS-232: 9 pin Subminiature D (female) RS-232 (fiber optic): Type ST USB 2.0: Type B Ethernet: RJ-45
benchtop use, but can also be removed for immediate equipment rack mounting.Features and Specifications of the Amplifier Research 20S1G4 include:
- Provides a minimum of 20 watts of RF power when used with a sweep generator
- RF input leveling circuit:
- Controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm
- Protects the amplifier from RF input overdrive
- RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure
- Digital display on the front panel indicates the operate status and fault conditions when an over-temperature or power supply fault has occurred
- Digital control for both local and remote control of the amplifier
- All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
- Bus interface connector on back panel
- Local/Remote switch on front panel assures positive control of local or remote operation
- Rated power output: 20 watts minimum
- Power Output@ 3dB compression:
- Nominal: 25 watts
- Minimum: 20 watts
- Power Output@ 1dB compression:
- Nominal: 22 watts
- Minimum: 18 watts
- Flatness:
- Typical: ±1.5 dB
- Maximum: ±2.0 dB
- Frequency response: 0.7 – 4.2GHz instantaneously
- Input for rated output: 1.0 milliwatt maximum
- Gain (at maximum setting): 43 dB minimum
- Gain adjustment (continuous range): 10 dB minimum (4096 steps remote)
- Input impedance: 50 ohms, VSWR 2.0:1 maximum
- Output impedance: 50 ohms, nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Harmonic distortion: Minus 20 dBc maximum at 20 watts
- Spurious: Minus 73 dBc typical
- Third order intercept point: 52 dBm typical
- Noise figure: 10 dB typical
- Primary power (selected automatically):
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 210 watts maximum
- Connectors:
- RF: Type N female
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety interlock: 15 Pin Subminiature D
- Cooling: Forced air (self contained fans)
- Controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm
- Protects the amplifier from RF input overdrive
- Nominal: 25 watts
- Minimum: 20 watts
- Nominal: 22 watts
- Minimum: 18 watts
- Typical: ±1.5 dB
- Maximum: ±2.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 210 watts maximum
- RF: Type N female
- Remote interfaces:
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin female
- RS-232: 9 pin Subminiature D (female)
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Returns
If you are not completely satisfied with your purchase, simply return the item to us in its original condition within 30 days of receipt.
Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund on receipt, excluding the original delivery charge. Alternatively, if preferred, we will exchange the item.
VAT
Prices exclude VAT. Intra-Community transactions: Under the EU VAT Directive, B2B sales of goods across EU VAT borders is VAT zero-rated.
Where VAT is charged, a rate of 23% is applied.
VAT is not charged outside of the EU.
