DE
IT
ES
FR
PL
Amplifier Research 50S1G6
| Manufacturer | Amplifier Research |
| Model | 50S1G6 |
| Product | RF Amplifier 0.7 - 6 GHz 50W |
| Type | Used |
SKU
120444
Amplifier Research 50S1G6 The Amplifier Research 50S1G6 is a self-contained, air-cooled, broadband amplifier designed for applications that require instantaneous bandwidth, high gain, and linearity. It is housed in a stylish cabinet and designed for benchtop use, but can be removed for equipment rack mounting.Features and Specifications of the Amplifier Research 50S1G6 Amplifier include: Features: Specifications: Provides a minimum of 50 watts of RF power when used with a sweep generator Front panel gain control provides convenience of setting desired output level RF input leveling circuit: RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs Control functions and status indications are available remotely in GPIB/IEEE format, RS-232 hardwire and fiber optic, USB and Ethernet Bus interface connector on back panel Local/Remote switch on front panel assures positive control of local or remote operation Low level of spurious signals and linearity make it ideal for these uses: Protects the amplifier from RF input overdrive Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm As a driver amplifier in testing wireless and communication components and subsystems As a test instrument covering mutiple frequency bands For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc. Rated output power: 50 watts minimum Input for rated output: 1.0 milliwatt maximum Power output @ 3dB compression: Power output @ 1dB compression: Small Signal Gain Flatness: Frequency response: 1.0 – 6 GHz instantaneously Gain (at maximum setting): 48 dB minimum Gain adjustment (continuous range): 10 dB minimum (4096 steps remote) Input impedance: 50 ohms, VSWR 2.0:1 maximum Output impedance: 50 ohms nominal Mismatch tolerance: Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal Third order intercept point: 56 dBm typical Noise figure: 10 dB typical Harmonic distortion: Minus 20 dBc maximum at 40 watts Spurious: Minus 73 dBc typical Phase linearity: ±1.0 deg/100 MHz typical Primary power (selected automatically): Connectors: Safety Interlock: 15 pin Subminiature D Cooling: Forced air (self contained fans) Nominal: 65 watts Minimum: 50 watts Nominal: 50 watts Minimum: 40 watts typical: ±1.5 dB maximum: ±2.0 dB 100% of rated power without foldback Will operate without damage or oscillation with any magnitude and phase of source and load impedance 90-132, 180-264 VAC 50/60 Hz, single phase 525 watts maximum RF: Type N female Remote Interfaces: IEEE-488: 24 pin RS-232: 9 pin Subminiature D RS-232 (fiber-optic): Type ST USB 2.0: Type B Ethernet: RJ-45
- Provides a minimum of 50 watts of RF power when used with a sweep generator
- Front panel gain control provides convenience of setting desired output level
- RF input leveling circuit:
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- RF amplifier stages are protected from over-temperature, due to cooling blockage or fan failure, by removing the DC voltage to them
- Digital Display on front panel indicates operate status and fault conditions when over-temperature or power supply fault occurs
- Control functions and status indications are available remotely in GPIB/IEEE format, RS-232 hardwire and fiber optic, USB and Ethernet
- Bus interface connector on back panel
- Local/Remote switch on front panel assures positive control of local or remote operation
- Low level of spurious signals and linearity make it ideal for these uses:
- As a driver amplifier in testing wireless and communication components and subsystems
- As a test instrument covering mutiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- Rated output power: 50 watts minimum
- Input for rated output: 1.0 milliwatt maximum
- Power output @ 3dB compression:
- Nominal: 65 watts
- Minimum: 50 watts
- Power output @ 1dB compression:
- Nominal: 50 watts
- Minimum: 40 watts
- Small Signal Gain Flatness:
- typical: ±1.5 dB
- maximum: ±2.0 dB
- Frequency response: 1.0 – 6 GHz instantaneously
- Gain (at maximum setting): 48 dB minimum
- Gain adjustment (continuous range): 10 dB minimum (4096 steps remote)
- Input impedance: 50 ohms, VSWR 2.0:1 maximum
- Output impedance: 50 ohms nominal
- Mismatch tolerance:
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
- Third order intercept point: 56 dBm typical
- Noise figure: 10 dB typical
- Harmonic distortion: Minus 20 dBc maximum at 40 watts
- Spurious: Minus 73 dBc typical
- Phase linearity: ±1.0 deg/100 MHz typical
- Primary power (selected automatically):
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 525 watts maximum
- Connectors:
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- Safety Interlock: 15 pin Subminiature D
- Cooling: Forced air (self contained fans)
- Protects the amplifier from RF input overdrive
- Controls RF input level to the RF amplifier first stage when RF input level is increased above 0 dBm
- As a driver amplifier in testing wireless and communication components and subsystems
- As a test instrument covering mutiple frequency bands
- For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
- Nominal: 65 watts
- Minimum: 50 watts
- Nominal: 50 watts
- Minimum: 40 watts
- typical: ±1.5 dB
- maximum: ±2.0 dB
- 100% of rated power without foldback
- Will operate without damage or oscillation with any magnitude and phase of source and load impedance
- 90-132, 180-264 VAC
- 50/60 Hz, single phase
- 525 watts maximum
- RF: Type N female
- Remote Interfaces:
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber-optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45
Returns
If you are not completely satisfied with your purchase, simply return the item to us in its original condition within 30 days of receipt.
Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund on receipt, excluding the original delivery charge. Alternatively, if preferred, we will exchange the item.
VAT
Prices exclude VAT. Intra-Community transactions: Under the EU VAT Directive, B2B sales of goods across EU VAT borders is VAT zero-rated.
Where VAT is charged, a rate of 23% is applied.
VAT is not charged outside of the EU.
