Amplifier Research SC1000
| Attribute | Value |
|---|---|
| Frequency Range | DC – 1000 MHz |
| Power Output | 1000 Watts CW |
| Gain | 45 dB minimum |
| Input Power Required | 0 dBm (1 mW) nominal for rated output |
| Harmonic Distortion | -10 dBc maximum (2nd and 3rd harmonics) |
| Input VSWR | 2.0:1 maximum |
| Output VSWR | 2.0:1 maximum |
| Noise Figure | 10 dB typical |
| Power Supply | 208/240 VAC, 3-phase, 50/60 Hz |
| Cooling Method | Forced air cooling |
Amplifier Research SC1000 Options:
- SC1000 - M1 - Controller designed for multi-amplifier/multi-load applications with forward and reverse power measurement and emissions feedback
- SC1000 - M2 - Controller accommodates forward power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized
- SC1000 - M3 - Controller accommodates forward and reverse power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized
- SC1000 - M4 - Controller accommodates forward and reverse power measurement and higher power/higher frequency (up to 40 GHz) amplifier and load combinations where switching and cable losses need to be minimized
- SC1000 - M5 - Controller accommodates forward and reverse power measurement, higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized, and emissions feedback
| Model | SC1000 |
|---|
The Amplifier Research SC1000 is a powerful RF test system controller that enables simultaneous operation of up to three signal generators, four power amplifiers, and four RF loads. It features IEEE-488, RS-232, and manual control for routing RF signals, plus a 4-line vacuum fluorescent display. Built-in interlock functionality ensures safe signal handling, and additional outputs allow for external switch integration.
This unit streamlines broadband RF testing by eliminating frequent cable changes and allows flexible system configurations for advanced testing scenarios.
Testwall can supply the used Amplifier Research SC1000, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Amplifier Research SC1000
