Anritsu 69063A Synthesized CW Generator, 2 GHz - 40 GHz, +17dBm Signal Generator
| Attribute | Value |
|---|---|
| Frequency Range | 2 GHz - 40 GHz |
| Maximum Output Power | +17 dBm |
| Frequency Resolution | 1 Hz |
| Frequency Switching Speed | 10 ms typical |
| Phase Noise | -80 dBc/Hz at 10 kHz offset (typical) |
| Output Power Range | -110 dBm to +17 dBm |
| Power Level Resolution | 0.02 dB |
| Harmonic Suppression | -30 dBc typical |
| RF Output Connector | 2.92 mm (K-type) female |
| Power Requirements | 100-240 VAC, 47-63 Hz |
Anritsu 69063A Synthesized CW Generator, 2 GHz - 40 GHz, +17dBm Signal Generator Options:
- 69063A - Option 1 - Rack mounting kit, includes one set of track slides (90° tilt capability), mounting ears, and front panel handles for mounting in a standard 19-inch equipment rack
- 69063A - Option 2A - Step attenuator (10 dB/step, high-end frequency of ≤26.5 GHz, rated output power is reduced)
- 69063A - Option 2B - Step attenuator (10 dB/step, high-end frequency of ≤40 GHz, rated output power is reduced)
- 69063A - Option 2C - Step attenuator (10 dB/step, high-end frequency of ≤50 GHz, rated output power is reduced)
- 69063A - Option 2D - Step attenuator (10 dB/step, high-end frequency of ≤60 GHz, rated output power is reduced)
- 69063A - Option 9 - Rear panel RF output (moves RF output connector to the rear panel)
- 69063A - Option 11 - 0.1 Hz frequency resolution (provides frequency resolution of 0.1 Hz)
- 69063A - Option 14 - Wiltron 360B VNA compatibility (modifies rack mounting hardware to mate unit in Wiltron 360B VNA console)
- 69063A - Option 15 - High power output (provides high-power from 2 to 26.5 GHz)
- 69063A - Option 16 - High stability time base (adds an ovenized, 10 MHz crystal oscillator as a high-stability time base)
- 69063A - Option 17 - Delete front panel (deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed)
- 69063A - Option 18 - MM-wave bias (rear panel bias output to drive 54000-XX WRXX multiplier, BNC twinax; not available with Option 20)
- 69063A - Option 19 - SCPI programmability adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0; SCPI programming complies with IEEE 488.2-1987
| Model | 69063A |
|---|
The Anritsu 69063A Synthesized CW Generator is a microprocessor-based signal source with high-resolution phase-lock capability, designed for precision frequency generation. Covering a wide frequency range from 2 GHz to 40 GHz, it delivers output power from +9.0 dBm to +6.0 dBm, and with the step attenuator engaged, from +7.0 dBm to +3.0 dBm. It supports both discrete CW frequencies and broad or narrow band sweeps, with full local control via front panel or remote operation through the IEEE488 GPIB interface.
This versatile signal generator is ideal for advanced RF and microwave testing applications, offering stable and accurate performance across its frequency range. Its programmability and precise output make it suitable for laboratory, production, and research environments.
Testwall can supply the used Anritsu 69063A, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu 69063A.
