Anritsu MS4622D
| Attribute | Value |
|---|---|
| Frequency Range | 300 kHz to 6 GHz |
| Number of Ports | 2-Port Vector Network Analyzer |
| Dynamic Range | Greater than 120 dB |
| Output Power Range | -60 dBm to +3 dBm |
| Measurement Parameters | S-Parameters (S11, S21, S12, S22), impedance, admittance, and group delay |
| IF Bandwidth | 1 Hz to 30 kHz |
| Number of Data Points | Up to 1601 points per sweep |
| Connector Type | N-Type (50 Ohm) test port connectors |
| Display | 10.4-inch color LCD display |
| Interface/Connectivity | GPIB, RS-232, and Centronics parallel interface |
Anritsu MS4622D Options:
- MS4622D - MS4600/1 - Rack Mount Kit with Slides (track slides with 90° tilt capability, mounting ears, and front panel handles for standard 19-inch equipment rack)
- MS4622D - MS4600/1A - Rack Mount Kit with Handles (mounting ears and hardware to permanently mount in standard 19-inch equipment rack, no slides)
- MS4622D - MS4600/2 - Time (Distance) Domain (Lowpass, Bandpass or Phasor Impulse processing; Windows and Gating support)
- MS4622D - MS4600/4F - 3 GHz Noise Figure (50 MHz to 3 GHz, for MS462xD models)
- MS4622D - MS4600/4G - 6 GHz Noise Figure (50 MHz to 6 GHz, for MS462xD models)
- MS4622D - MS4600/5 - Frequency Translating Group Delay (FTGD) - Mixer group delay measurement
- MS4622D - MS4600/8 - Harmonic Measurements (adds firmware to orchestrate harmonics measurements)
- MS4622D - MS4600/11NM - Connector Designation: Replaces N female with N male Test Port Adapters
- MS4622D - MS4600/11S - Connector Designation: Replaces N female with 3.5mm male Test Port Adapters
- MS4622D - MS4600/11SF - Connector Designation: Replaces N female with 3.5mm female Test Port Adapters
- MS4622D - MS4600/11A - Connector Designation: Replaces N female with GPC-7 male Test Port Adapters
- MS4622D - MS4600/13 - Intermodulation Distortion Measurements (CW, swept frequency and swept power IMD measurements)
- MS4622D - MS4600/98 - Z540/Guide 25 Calibration
- MS4622D - MS4600/99 - Premium Calibration
- MS4622D - ES31 - 3 Year On-Site Repair
- MS4622D - ES37 - 3 Year On-Site Standard Calibration
- MS4622D - ES38 - 3 Year On-Site Premium Calibration
- MS4622D - ES32 - 3 Year Return-to-Service Center Standard Calibration
- MS4622D - ES34 - 3 Year Return-to-Service Center Premium Calibration
- MS4622D - ES50 - 5 Year Return-to-Service Center Repair Only
- MS4622D - ES52 - 5 Year Return-to-Service Center Standard Calibration
- MS4622D - ES54 - 5 Year Return-to-Service Center Premium Calibration
- MS4622D - ES55 - 5 Year Return-to-Service Center Repair plus Standard Calibration
- MS4622D - ES56 - 5 Year Return-to-Service Center Repair plus Premium Calibration
| Model | MS4622D |
|---|
The Anritsu MS4622D builds upon the MS4622C with superior calibration and processing, integrating dual sources including an internal 3 GHz generator. Its third port and step attenuator enable comprehensive connectivity, while automatic calibration ensures enhanced dynamic stability. Tailored for demanding RF component characterization at 3 GHz and below, it provides high precision for amplifiers, mixers, and passive devices.
The Anritsu MS4622D is particularly effective for verification tasks requiring accuracy and flexibility, with optional software modules allowing upgradeability and extended functionality.
Testwall can supply the used Anritsu MS4622D, fully tested. With expert support and global delivery, Testwall ensures high-performance instrumentation with unmatched reliability and service quality. Please contact us directly if you need calibration or repair of the Anritsu MS4622D.
