California Instruments
California Instruments 1001WP
AC Power Source, 1000 VA, 1 Phase
1000 VA Power Output
0 to 300 VAC Output Voltage Range
45 Hz to 500 Hz Frequency Range
4.2 A RMS Output Current (Max)
105 to 125 VAC, Single Phase Input Voltage
| Attribute | Value |
|---|---|
| Power Output | 1000 VA |
| Output Voltage Range | 0 to 300 VAC |
| Frequency Range | 45 Hz to 500 Hz |
| Output Current (Max) | 4.2 A RMS |
| Input Voltage | 105 to 125 VAC, Single Phase |
| Input Frequency | 47 to 63 Hz |
| Total Harmonic Distortion (THD) | Less than 0.5% at full resistive load |
| Programming Interface | IEEE-488 (GPIB) and RS-232 |
| Output Waveform | Sine Wave |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
California Instruments 1001WP Options:
- 1001WP - PC11 - Line Cord Option: Continental Europe
- 1001WP - PC12 - Line Cord Option: Australia / New Zealand
- 1001WP - PC13 - Line Cord Option: UK / Ireland etc.
- 1001WP - PC14 - Line Cord Option: Denmark
- 1001WP - PC15 - Line Cord Option: India
- 1001WP - PC16 - Line Cord Option: Israel
- 1001WP - PC17 - Line Cord Option: Italy
- 1001WP - PC19 - Line Cord Option: Switzerland
- 1001WP - PC21 - Line Cord Option: North America
| Model | 1001WP |
|---|
California Instruments 1001WP AC Power Source The California Instruments 1001WP AC Power Source is designed for world-wide use. Output voltage of 100, 115, 220, 230 and 240 Volts are available to produce all standard world power options. The portable, conveniently sized unit delivers a continuous 1000 VA of power, and the output frequency can be selected to be either 50 or 60 Hz, independent of the input frequency or output voltage. Operating efficiently from a single phase AC outlet, the California Instruments 1001WP AC power source puts the convenience of international power at any bench. With preset limits at ±10% of the output voltage selected, and ±3Hz of either 50 or 60 Hz, it is extremely easy for the 1001WP AC power source to test products for operation over normal worst case conditions. This is especially important for products that rely on line power synchronization. Selection of either 100/ 115 V or 220/230/240 V is via a conveniently accessible switch. Any combination of one high and one low voltage option is possible. These California Instruments 1001WP AC power sources represent an new concept to meet the requirements of companies who need to test their products for use from nonstandard power. Specifications of the California Instruments 1001P AC Power Source includes: See Datasheet for Full Specifications
