California Instruments
California Instruments CSW11100
AC/DC Power Source, 11.1kVA
11,100 VA (11.1 kVA) Power Output
0 to 300 VAC (single phase), 0 to 156 VAC (split phase) Output Voltage Range
DC, 16 Hz to 500 Hz Frequency Range
Up to 45 Arms continuous Output Current
1 or 2 (single or split phase output) Number of Phases
| Attribute | Value |
|---|---|
| Power Output | 11,100 VA (11.1 kVA) |
| Output Voltage Range | 0 to 300 VAC (single phase), 0 to 156 VAC (split phase) |
| Frequency Range | DC, 16 Hz to 500 Hz |
| Output Current | Up to 45 Arms continuous |
| Number of Phases | 1 or 2 (single or split phase output) |
| Input Voltage | 208 VAC, 3-phase |
| Total Harmonic Distortion (THD) | Less than 0.5% at full linear load |
| Waveform | Sine wave (programmable arbitrary waveforms supported) |
| Output Regulation | 0.1% load regulation |
| Interface / Control | GPIB, RS-232, and optional LAN/USB interfaces for remote programmability |
California Instruments CSW11100 Options:
- CSW11100 - LAN - LXI Ethernet LAN Interface (RJ45 Connector)
- CSW11100 - LKM - Clock/Lock Master
- CSW11100 - LKS - Clock/Lock Auxiliary
- CSW11100 - 413 - IEC61000-4-13 Harmonics and Interharmonics test firmware and hardware
- CSW11100 - 411 - IEC61000-4-11 test firmware. See also EOS1/3
- CSW11100 - WHM - Watt-Hour Measurement option
- CSW11100 - MB - Multi-Box. Adds controller to auxiliary chassis of multi-chassis systems
- CSW11100 - 400 - 342-457 Volt Line to Line AC input
- CSW11100 - ELF - Extra Low Frequency for 2Hz operation
- CSW11100 - HF - High Frequency for 7,990 Hz operation
- CSW11100 - LF - Limits output frequency to 500 Hz
- CSW11100 - FC - Modifies output frequency control to ±0.15%
- CSW11100 - RMS - Rackmount Slides. Recommended for rack mount applications
- CSW11100 - C prefix - Cabinet System. Installed and pre-wired in 19" cabinet
- CSW11100 - ABD - Airbus Directive 0100.1.8 tests
- CSW11100 - AMD - Airbus AMD24 tests
- CSW11100 - A350 - Airbus A350 tests
- CSW11100 - AIRB - Airbus ABD0100.1.8, AMD 24 and A350 combination test software suite
- CSW11100 - B787 - Boeing 787B3-0147 tests
- CSW11100 - 704F - Mil. Std. 704A-F tests
- CSW11100 - 160 - RTCA/DO-160A-G, Change 2, EuroCAE-14D and Airbus test firmware
| Model | CSW11100 |
|---|
California Instruments CSW11100 AC Power Source The California Instruments CSW11100 AC power source combines two CSW5550 units in parallel to create a high power AC source. By combining a flexible AC/DC power source with a high performance power Analyser, the CSW11100 AC source is capable of handling complex applications that have traditionally required multiple systems. All connections are made internally and the need for digital multimeters, power harmonics Analysers, and cur shunts or clamps is eliminated. The CSW11100 power source is designed for testing today’s complex electronics, including avionics, telecommunications and commercial electronics. A direct coupled, transformerless design allows AC and DC on separate phases or on the same phase. The CSW11100 features selectable Single or Three Phase output via front panel menu selection or via remote control interface. The measurement system is based on real-time digitization of the voltage and cur waveforms using a 4K deep sample buffer. This time domain information provides detailed information on both voltage and cur waveshapes. This further enhances the California Instrument CSW11100’s capability to simulate AC line conditions or DC disturbances. Specifications of the California Instruments CSW11100 AC Power Source includes: See Datasheet for Full Specifications
