California Instruments
California Instruments CSW5550
AC/DC Power Source, 5500VA
5550 VA Power Output
0 to 300 VAC (single phase), 0 to 156 VAC (split phase) Output Voltage Range
DC, 16 Hz to 500 Hz Frequency Range
18.5 A RMS continuous Output Current (Max)
1 Phase / Split Phase (1+1) Number of Phases
| Attribute | Value |
|---|---|
| Power Output | 5550 VA |
| Output Voltage Range | 0 to 300 VAC (single phase), 0 to 156 VAC (split phase) |
| Frequency Range | DC, 16 Hz to 500 Hz |
| Output Current (Max) | 18.5 A RMS continuous |
| Number of Phases | 1 Phase / Split Phase (1+1) |
| Input Voltage | 187 to 250 VAC, Single Phase |
| Total Harmonic Distortion (THD) | Less than 0.5% at full linear load |
| Output Voltage Accuracy | ±0.1% of full scale |
| Programming Interface | IEEE-488 (GPIB), RS-232, USB |
| Form Factor / Dimensions | Rack mountable, 3U chassis |
California Instruments CSW5550 Options:
- CSW5550 - LAN - LXI Ethernet LAN Interface (Rj45 Connector)
- CSW5550 - LKM - Clock/Lock Master
- CSW5550 - LKS - Clock/Lock Auxiliary
- CSW5550 - 413 - IEC61000-4-13 Harmonics and Interharmonics test firmware and hardware
- CSW5550 - 411 - IEC61000-4-11 test firmware. See also EOS1/3
- CSW5550 - WHM - Watt-Hour Measurement option
- CSW5550 - MB - Multi-Box. Adds controller to auxiliary chassis of multi-chassis systems
- CSW5550 - SW - SCPI Command Firmware (Simulates the Elgar SW Series)
- CSW5550 - 400 - 342-457 Volt Line to Line AC input
- CSW5550 - LF - Limits output frequency to 500 Hz
- CSW5550 - FC - Modifies output frequency control to ± 0.25%
- CSW5550 - RMS - Rackmount Slides. Recommended for rack mount applications
- CSW5550 - C prefix - Cabinet System. Installed and pre-wired in 19" cabinet
- CSW5550 - ABD - Airbus Directive 0100.1.8 tests
- CSW5550 - AMD - Airbus AMD24 tests
- CSW5550 - A350 - Airbus A350 tests
- CSW5550 - AIRB - Airbus ABD0100.1.8, AMD 24 and A350 combination test software suite
- CSW5550 - B787 - Boeing 787B3-0147 tests
- CSW5550 - 704F - Mil. Std. 704A-F tests
- CSW5550 - 160 - RTCA/DO-160D, Change 2, EuroCAE-14D and Airbus test firmware
| Model | CSW5550 |
|---|
California Instruments CSW5550 AC Power Source By combining a flexible AC/DC power source with a high performance power Analyser, the California Instruments CSW5550 is capable of handling complex applications that have traditionally required multiple systems. All connections are made internally and the need for digital multimeters, power harmonics Analysers, and cur shunts or clamps is eliminated. The California Instruments CSW5550 AC power source is designed for testing today’s complex electronics, including avionics, telecommunications and commercial electronics requiring low profile, light weight power supplies. The CSW5550 AC power source is based on a 5,550VA power source and features selectable Single or Three Phase output via front panel menu selection or via remote control interface. A direct coupled, transformerless design allows AC and DC on separate phases or on the same phase. The California Instruments CSW5550 can be used as a true DC power supply and has a powerful AC and DC transient generation system that allows complex sequences of voltage, frequency and waveshapes to be generated. Since many components in the CSW5550 are shared between the AC/DC source and the power Analyser, the total cost of the integrated system is less than the typical cost of a multiple unit system. Specifications of the California Instruments CSW5550 AC Power Source includes: See Datasheet for Full Specifications
