DE
IT
ES
FR
PL
Chroma 62050P-100-100
| Manufacturer | Chroma |
| Model | 62050P-100-100 |
| Product | Programmable DC Power Supply, 100V, 100A, 5000W |
| Type | Used |
SKU
122878
Chroma 62050P-100-100 POWER SUPPLYThe Chroma 62050P-100-100 Programmable DC Power Supply with its constant power operating envelope can provide high voltage/low cur as well as low voltage/high cur in a single instrument. This efficient design reduces the number of supplies needed in typical ATE and benchtop applications. The Chroma 62050P-100-100 Programmable DC Power Supply also provides precision readback of output cur and voltage and output trigger signals. It provides the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations and is perfect for automated testing DC-DC converters and similar products.Features and Specifications of the 62050P-100-100 Programmable DC Power Supply include: Features: Specifications: Wider range of voltage & cur within the power rating of the power supply High-speed Programming Precision V&I Measurements Cur sharing for parallel operation with Master/Slave Control LXI option Constant power operating envelope: High Accuracy cur readback: DC Transients: Output Trigger: VID Control: Instruments include 8 independent programmable TTL signals which can be used for VID control or any general purpose logic controls Soft Panels: Provides higher curs at lower voltages One power supply can do the job of two or three conventional supplies No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters No need for cur shunts/mux/DMMs to measure the converter's input cur accurately Work benches and test systems are less complex, less costly and can cover a wider range of converters Provides programmable control over voltage and cur rise and falls times Allows complex dc transients to be generated which are not possible with conventional power supplies Supports: Automotive transient testing per ISO16750-2 Shipboard - DO-160 Provides output trigger timing and precision event capturing Ideal for ATE systems desiring to capture Oscilloscope waveforms Advanced Labview graphical control panels Allow for simple and efficient control and data gathering Output Rationgs: Line Regulation: Load Regulation: Voltage Measurement: Cur Measurement: Output Noise (0-20MHz): OVP Adjustment Range: 110% of Vset to 110% of Vmax Slew Rate Range: Programming Response Time (Typical): Efficiency: 0.85 Drift (8 hours): Temperature Coefficient: Transient Response Time: 3mS AC Input Voltage Ranges: Output Voltage: 0~100V Output Cur: 0~100A Output Power: 5000W Voltage: 0.01%+8mV Cur: 0.01%+24mA Voltage: 0.01%+12mV Cur: 0.01%+56mA Range: 20V / 100V Accuracy: 0.05%+0.05%F.S. Range: 20A / 100A Accuracy: 0.1%+0.1%F.S. Voltage Ripple (P-P): 50 mV Voltage Ripple (ms): 15 mV Cur Ripple (ms): 40 mA Voltage (with USB): 0.001V - 10V/ms Cur (with USB): 0.001A - 2A/ms Rise Time (Full & No Load): 10 ms Fall Time: 850 ms(max) Voltage: 0.02% of Vmax Cur: 0.04% of Imax Voltage: 0.02% of Vmax / °C Cur: 0.04% of Imax / °C 10% Step Change: 250 mV Voltage Limit @ Series Mode: 500 V 190 to 250Vac (3 phase 4 wire, Delta connection) or 342 to 440Vac (3 phase 5 wire, Y connection)
- Wider range of voltage & cur within the power rating of the power supply
- High-speed Programming
- Precision V&I Measurements
- Cur sharing for parallel operation with Master/Slave Control
- LXI option
- Constant power operating envelope:
- Provides higher curs at lower voltages
- One power supply can do the job of two or three conventional supplies
- No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters
- High Accuracy cur readback:
- No need for cur shunts/mux/DMMs to measure the converter's input cur accurately
- Work benches and test systems are less complex, less costly and can cover a wider range of converters
- DC Transients:
- Provides programmable control over voltage and cur rise and falls times
- Allows complex dc transients to be generated which are not possible with conventional power supplies
- Supports:
- Automotive transient testing per ISO16750-2
- Shipboard - DO-160
- Output Trigger:
- Provides output trigger timing and precision event capturing
- Ideal for ATE systems desiring to capture Oscilloscope waveforms
- VID Control: Instruments include 8 independent programmable TTL signals which can be used for VID control or any general purpose logic controls
- Soft Panels:
- Advanced Labview graphical control panels
- Allow for simple and efficient control and data gathering
- Output Rationgs:
- Output Voltage: 0~100V
- Output Cur: 0~100A
- Output Power: 5000W
- Line Regulation:
- Voltage: 0.01%+8mV
- Cur: 0.01%+24mA
- Load Regulation:
- Voltage: 0.01%+12mV
- Cur: 0.01%+56mA
- Voltage Measurement:
- Range: 20V / 100V
- Accuracy: 0.05%+0.05%F.S.
- Cur Measurement:
- Range: 20A / 100A
- Accuracy: 0.1%+0.1%F.S.
- Output Noise (0-20MHz):
- Voltage Ripple (P-P): 50 mV
- Voltage Ripple (ms): 15 mV
- Cur Ripple (ms): 40 mA
- OVP Adjustment Range: 110% of Vset to 110% of Vmax
- Slew Rate Range:
- Voltage (with USB): 0.001V - 10V/ms
- Cur (with USB): 0.001A - 2A/ms
- Programming Response Time (Typical):
- Rise Time (Full & No Load): 10 ms
- Fall Time: 850 ms(max)
- Efficiency: 0.85
- Drift (8 hours):
- Voltage: 0.02% of Vmax
- Cur: 0.04% of Imax
- Temperature Coefficient:
- Voltage: 0.02% of Vmax / °C
- Cur: 0.04% of Imax / °C
- Transient Response Time: 3mS
- 10% Step Change: 250 mV
- Voltage Limit @ Series Mode: 500 V
- AC Input Voltage Ranges:
- 190 to 250Vac (3 phase 4 wire, Delta connection)
- or 342 to 440Vac (3 phase 5 wire, Y connection)
- Provides higher curs at lower voltages
- One power supply can do the job of two or three conventional supplies
- No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters
- No need for cur shunts/mux/DMMs to measure the converter's input cur accurately
- Work benches and test systems are less complex, less costly and can cover a wider range of converters
- Provides programmable control over voltage and cur rise and falls times
- Allows complex dc transients to be generated which are not possible with conventional power supplies
- Supports:
- Automotive transient testing per ISO16750-2
- Shipboard - DO-160
- Provides output trigger timing and precision event capturing
- Ideal for ATE systems desiring to capture Oscilloscope waveforms
- Advanced Labview graphical control panels
- Allow for simple and efficient control and data gathering
- Automotive transient testing per ISO16750-2
- Shipboard - DO-160
- Output Voltage: 0~100V
- Output Cur: 0~100A
- Output Power: 5000W
- Voltage: 0.01%+8mV
- Cur: 0.01%+24mA
- Voltage: 0.01%+12mV
- Cur: 0.01%+56mA
- Range: 20V / 100V
- Accuracy: 0.05%+0.05%F.S.
- Range: 20A / 100A
- Accuracy: 0.1%+0.1%F.S.
- Voltage Ripple (P-P): 50 mV
- Voltage Ripple (ms): 15 mV
- Cur Ripple (ms): 40 mA
- Voltage (with USB): 0.001V - 10V/ms
- Cur (with USB): 0.001A - 2A/ms
- Rise Time (Full & No Load): 10 ms
- Fall Time: 850 ms(max)
- Voltage: 0.02% of Vmax
- Cur: 0.04% of Imax
- Voltage: 0.02% of Vmax / °C
- Cur: 0.04% of Imax / °C
- 10% Step Change: 250 mV
- Voltage Limit @ Series Mode: 500 V
- 190 to 250Vac (3 phase 4 wire, Delta connection)
- or 342 to 440Vac (3 phase 5 wire, Y connection)
Returns
If you are not completely satisfied with your purchase, simply return the item to us in its original condition within 30 days of receipt.
Returned items should be unused and must be returned in original packaging with any enclosed documentation. We will issue a full refund on receipt, excluding the original delivery charge. Alternatively, if preferred, we will exchange the item.
VAT
Prices exclude VAT. Intra-Community transactions: Under the EU VAT Directive, B2B sales of goods across EU VAT borders is VAT zero-rated.
Where VAT is charged, a rate of 23% is applied.
VAT is not charged outside of the EU.
