Anritsu
Anritsu MG3694C
Signal Generator 2-40 GHz
2 MHz – 40 GHz Frequenzbereich
+20 dBm Ausgangsleistung (maximal)
-110 dBm Ausgangsleistung (minimal)
0,001 Hz Frequenzauflösung
-116 dBc/Hz bei 10 kHz Abstand (bei 10 GHz) Phasenrauschen (typisch)
| Attribut | Wert |
|---|---|
| Frequenzbereich | 2 MHz – 40 GHz |
| Ausgangsleistung (maximal) | +20 dBm |
| Ausgangsleistung (minimal) | -110 dBm |
| Frequenzauflösung | 0,001 Hz |
| Phasenrauschen (typisch) | -116 dBc/Hz bei 10 kHz Abstand (bei 10 GHz) |
| Frequenzgenauigkeit | ±1 ppm (intern referenziert) |
| Modulationsarten | AM, FM, ΦM, Pulsamplitudenmodulation |
| Ausgangsanschluss | 2,92 mm (K-Typ), weiblich |
| Stromversorgung | 100–240 V AC, 50/60 Hz |
| Betriebstemperaturbereich | 0 °C bis +55 °C |
Anritsu MG3694C Options:
- MG3694C - 1A - Rack Mount with slides. Rack mount kit containing a set of track slides, mounting ears, and front panel handles to let the instrument be mounted in a standard 19-inch equipment rack.
- MG3694C - 1B - Rack Mount without slides. Modifies rack mounting hardware to install unit in a console that has mounting shelves. Includes mounting ears and front panel handles.
- MG3694C - 2A - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 2B - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 2C - Mechanical Step Attenuator. Adds a 10 dB/step attenuator. Rated RF output power is reduced.
- MG3694C - 3 - Ultra Low Phase Noise. Adds new modules to significantly reduce SSB phase noise.
- MG3694C - 3X - Premium Phase Noise. Improves Option 3 < 1 kHz offset.
- MG3694C - 4 - 8 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version. Uses a digital down converter to significantly reduce SSB phase noise. All specifications apply ≥ 10 MHz.
- MG3694C - 5 - 8 MHz to 2 GHz RF Coverage. Uses an analog down converter. All specifications apply ≥ 10 MHz.
- MG3694C - 6 - Analog Sweep Capability. When used with Option 4, analog sweep capability is limited to ≥ 500 MHz.
- MG3694C - 7 - IF Up-Conversion. Adds an internal 40 GHz mixer for up-converting an IF signal.
- MG3694C - 8 - Power Monitor. Adds internal power measurement capability. Not available with Option 9.
- MG3694C - 9K - Rear Panel Output. Moves the RF output connector to the rear panel. Not available with Option 8.
- MG3694C - 9V - Rear Panel Output. Moves the RF output connector to the rear panel. Not available with Option 8.
- MG3694C - 10 - User-Defined Modulation Waveform Software. External software package provides the ability to download user-defined waveforms into the memory of the internal waveform generator, serially or via GPIB or Ethernet. Requires Option 27.
- MG3694C - 12 - Frequency and Phase Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of an LF Generator, Option 27.
- MG3694C - 14 - Amplitude Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of an LF Generator, Option 27.
- MG3694C - 15A - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15B - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15C - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 15D - High Power. Adds high-power RF components to the instrument to increase its output power level.
- MG3694C - 16 - High Stability Time Base. Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base.
- MG3694C - 17 - Delete Front Panel. Deletes the front panel for use in remote control applications. Only available with Options 1A or 1B.
- MG3694C - 18 - DC Output. Adds a rear panel BNC Twinax connector supplying +15 VDC, 1A (nominal). Not available with Option 7 or 15x.
- MG3694C - 22 - 0.1 Hz to 10 MHz Audio coverage. Uses a DDS for coverage down to approximately DC. Output power derated by 2 dB. Requires Option 4 or 5.
- MG3694C - 26A - Pulse Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of a Pulse Generator, Option 27.
- MG3694C - 26B - Pulse Modulation. External, via a rear panel BNC connector. For internal modulation capability, requires addition of a Pulse Generator, Option 27.
- MG3694C - 27 - Internal LF and Pulse Generators. Provides modulation waveforms for internal AM, FM, ΦM and Pulse. Not available without Option 12, 14, or 26.
- MG3694C - 28A - Analog Modulation Suite. Bundles Options 12, 14, 26 and 27, offering internally- and externally-driven AM, FM, ΦM, and Pulse Modulation.
- MG3694C - 28B - Analog Modulation Suite. Bundles Options 12, 14, 26 and 27, offering internally- and externally-driven AM, FM, ΦM, and Pulse Modulation.
- MG3694C - 36 - Ultra-Stable Phase Tracking. Provides the capability for ultra-stable phase tracking between instruments using the internal 100 MHz reference. Requires Option 3, 3X, or 3XA.
- MG3694C - 98 - Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Provides a calibration certificate, decal, and tamper seals.
- MG3694C - 99 - Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Provides everything included with Option 98 plus test report and uncertainty data.
| Model | MG3694C |
|---|
Der Anritsu MG3694C ist ein breitbandiger Signalgenerator, der Frequenzen von 0,1 Hz bis 40 GHz über einen einzelnen Koax-Ausgang abdeckt und mit externen Multiplikatoren auf 325 GHz erweiterbar ist. Er bietet außergewöhnliche Flexibilität für RF- und Mikrowellen-Tests, mit drei Optionen für Phasenrauschleistung (Standard, Ultra Niedrig, Premium) und umfassenden Modulationsmöglichkeiten, einschließlich IQ-Modulation mit IF-Eingang.
Entwickelt als Nachfolger des MG3690B, liefert dieser Generator fortschrittliche Leistung für Signalsimulationen – von einfachen RF- bis hin zu hochkomplexen Mikrowellenanwendungen – bei gleichzeitiger Abwärtskompatibilität zu früheren Anritsu-Modellen.
Testwall kann den gebrauchten Anritsu MG3694C liefern, vollständig getestet. Mit professionellem Support und weltweitem Versand garantiert Testwall leistungsstarke Messtechnik mit unvergleichlicher Zuverlässigkeit und Servicequalität. Bitte kontaktieren Sie uns direkt, wenn Sie Kalibrierung oder Reparatur des Anritsu MG3694C benötigen.
