California Instruments
California Instruments MX45-3PI
AC DC Power Supply System, 45kVA, 1 and 3 Phase
45 kVA Ausgangsleistung
3-phasig Phasenkonfiguration
0 – 300 V AC (Strang), 0 – 520 V AC (Leiter-Leiter) Ausgangsspannung
16 Hz – 850 Hz Ausgangsfrequenz
75 A pro Phase (bei 200 V) Ausgangsstrom
| Attribut | Wert |
|---|---|
| Ausgangsleistung | 45 kVA |
| Phasenkonfiguration | 3-phasig |
| Ausgangsspannung | 0 – 300 V AC (Strang), 0 – 520 V AC (Leiter-Leiter) |
| Ausgangsfrequenz | 16 Hz – 850 Hz |
| Ausgangsstrom | 75 A pro Phase (bei 200 V) |
| Klirrfaktor (THD) | weniger als 0,5 % bei linearer Last |
| Programmierbare Schnittstellen | IEEE-488 (GPIB), RS-232, USB, LAN (optional) |
| Eingangsversorgungsspannung | 208 V AC / 400 V AC, 3-phasig |
| Schutzfunktionen | Überstrom-, Überspannungs- und Übertemperaturschutz |
| Abmessungen (B × H × T) | 483 mm × 1752 mm × 762 mm (19-Zoll-Rack) |
California Instruments MX45-3PI Options:
- MX45-3PI - -411 - IEC 1000-4-11 test firmware
- MX45-3PI - -LF - Limits maximum frequency to 500 Hz
- MX45-3PI - -FC - Modifies output frequency control to ± 0.25%
- MX45-3PI - -LAN - Ethernet Interface
- MX45-3PI - -HF - Increases max frequency to 905 Hz
- MX45-3PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- MX45-3PI - -HV - Adds 400 V L-N AC-only output range
- MX45-3PI - -XV - Adds other AC-only output range (consult factory)
- MX45-3PI - -LKM - Clock/Lock Master
- MX45-3PI - -LKS - Clock/Lock Auxiliary
- MX45-3PI - -WHM - Watt-Hour Measurement option
- MX45-3PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability in AC mode of operation
- MX45-3PI - -EXTD - External Drive allows external signal control
- MX45-3PI - -ABD - ABD0100.1.8 Test Option
- MX45-3PI - -AMD - Airbus AMD24 Test
- MX45-3PI - -A350 - Airbus Test Software
- MX45-3PI - -B787 - Boeing 787 Test Software
- MX45-3PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
- MX45-3PI - -704 - Mil Std 704 A-F test firmware/software
- MX45-3PI - -MB - Reconfigurable system; can be separated into stand-alone MX45-3Pi models or combined for higher power levels
| Model | MX45-3PI |
|---|
California Instruments MX45-3PI AC Power Source As governments are moving to enforce product quality standards, regulatory compliance testing is becoming a requirement for a growing number of manufacturers. The California Instruments MX45 power source is designed to meet AC source requirements for use in compliance testing such as IEC 61000, 3-2, 3-3, 3-11, and 3-12. The MX45-3PI controller has a powerful AC and DC transient generation system that allows complex sequences of voltage, frequency and waveshapes to be generated. When combined with the multiphase arbitrary waveform capabilities, the AC and DC output possibilities are truly exceptional. This high power AC and DC test system covers a wide spectrum of AC and DC power applications. The MX45 delivers up to 45 kVA and operates using single or three phase output in AC or AC+DC mode. In DC mode, 50% of the AC power level is available. The MX45-3PI amplifier is designed to reverse the phase relationship between the AC input voltage and cur in order to feed power back onto the utility grid. This mode of operation is particularly useful when testing grid-tied products that feed energy back onto the grid. For high power applications, two or three MX45 chassis can be combined to provide 90 to 135 kVA of three phase power. Specifications of the California Instruments MX45-3PI AC Power Source includes: See Datasheet for Full Specifications
