California Instruments
California Instruments MX90-3/PI
AC DC Power Supply System, 90kVA, 1 and 3 Phase
90 kVA Ausgangsleistung
3-phasig Phasenkonfiguration
0 – 300 V AC (Strang), 0 – 520 V AC (Leiter-Leiter) Ausgangsspannung
45 – 1000 Hz Ausgangsfrequenz
Ja (PI-Option für simulierte Leitungsimpedanz) Programmierbare Impedanz
| Attribut | Wert |
|---|---|
| Ausgangsleistung | 90 kVA |
| Phasenkonfiguration | 3-phasig |
| Ausgangsspannung | 0 – 300 V AC (Strang), 0 – 520 V AC (Leiter-Leiter) |
| Ausgangsfrequenz | 45 – 1000 Hz |
| Programmierbare Impedanz | Ja (PI-Option für simulierte Leitungsimpedanz) |
| Klirrfaktor (THD) | < 0,5 % |
| Eingangsversorgung | 3-phasig, 208 V / 400 V AC, 50/60 Hz |
| Schnittstellenoptionen | GPIB, RS-232, optionale LAN/USB-Schnittstelle |
| Schutzfunktionen | Überstromschutz, Überspannungsschutz, Übertemperaturschutz |
| Abmessungen (B × H × T) | 483 mm × 1752 mm × 800 mm (19-Zoll-Rack-Gehäuse) |
California Instruments MX90-3/PI Options:
- MX90-3/PI - 208 - Configured for 208 V ±10% L-L, 4 wire input
- MX90-3/PI - 230 - Configured for 230 V ±10% L-L, 4 wire input
- MX90-3/PI - 400 - Configured for 400 V ±10% L-L, 4 wire input
- MX90-3/PI - 480 - Configured for 480 V ±10% L-L, 4 wire input
- MX90-3/PI - -411 - IEC 1000-4-11 test firmware
- MX90-3/PI - -LF - Limits maximum frequency to 500 Hz
- MX90-3/PI - -FC - Modifies output frequency control to ± 0.25%
- MX90-3/PI - -LAN - Ethernet Interface
- MX90-3/PI - -HF - Increases max frequency to 905 Hz
- MX90-3/PI - -413 - IEC 1000-4-13 Harmonics & Interharmonics test firmware
- MX90-3/PI - -HV - Adds 400 V L-N AC-only output range
- MX90-3/PI - -XV - Adds other AC-only output range (consult factory)
- MX90-3/PI - -LKM - Clock/Lock Master
- MX90-3/PI - -LKS - Clock/Lock Auxiliary
- MX90-3/PI - -WHM - Watt-Hour Measurement option
- MX90-3/PI - -SNK - Bidirectional auto source and sink mode; offers up to 100% power sink capability in AC mode of operation
- MX90-3/PI - -SNK-DC - Sink DC current mode
- MX90-3/PI - -EXTD - External Drive allows external signal control
- MX90-3/PI - -ABD - ABD0100.1.8 Test Option
- MX90-3/PI - -AMD - Airbus AMD24 Test
- MX90-3/PI - -A350 - Airbus Test Software
- MX90-3/PI - -B787 - Boeing 787 Test Software
- MX90-3/PI - -160 - RTCA/DO-160D, DO-160E, and EUROCAE test firmware
- MX90-3/PI - -704 - Mil Std 704 A-F test firmware/software
- MX90-3/PI - -MB - Reconfigurable multi-box option; MX90-3Pi-MB provides Dual MX45-3Pi controllers allowing separation into individual units
| Model | MX90-3/PI |
|---|
California Instruments MX90-3PI AC Power Source The Calfornia Instruments MX90-3PI power source is much more than a programmable AC, DC or AC+DC power source. It also incorporates an advanced digital signal processor based data acquisition system that continuously monitors all AC source and load parameters. The MX90-3PI consists of multiple high power AC and DC power systems that provide controlled AC and DC output for ATE and product test applications. For high power applications, the MX90-3PI is made up of two MX45 chassis, combined in parallel to provide 90kVA of three phase power. This high power AC and DC test system covers a wide spectrum of AC and DC power applications at an affordable cost. Using the latest DSP technology, the California Instruments MX90-3PI programmable controller is capable of generating harmonic waveforms to test for harmonics susceptibility. Up to 200 waveforms can be stored in nonvolatile memory and given a user defined name for easy recall. Transient programming is easily accomplished from the front panel where clearly laid out menu’s guide the user through the transient definition process. The MX90-3PI AC power source is designed to meet AC source requirements for use in compliance testing such as IEC 61000, 3-2, 3-3, 3-11, 3-12, to name a few. Specifications of the California Instruments MX90-3PI AC Power Source includes: See Datasheet for Full Specifications
