Chroma 62050P-100-100 POWER SUPPLYThe Chroma 62050P-100-100 Programmable DC Power Supply with its constant power operating envelope can provide high voltage/low cur as well as low voltage/high cur in a single instrument. This efficient design reduces the number of supplies needed in typical ATE and benchtop applications. The Chroma 62050P-100-100 Programmable DC Power Supply also provides precision readback of output cur and voltage and output trigger signals. It provides the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations and is perfect for automated testing DC-DC converters and similar products.Features and Specifications of the 62050P-100-100 Programmable DC Power Supply include:
Features:
Wider range of voltage & cur within the power rating of the power supply
High-speed Programming
Precision V&I Measurements
Cur sharing for parallel operation with Master/Slave Control
LXI option
Constant power operating envelope:
Provides higher curs at lower voltages
One power supply can do the job of two or three conventional supplies
No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters
High Accuracy cur readback:
No need for cur shunts/mux/DMMs to measure the converter's input cur accurately
Work benches and test systems are less complex, less costly and can cover a wider range of converters
DC Transients:
Provides programmable control over voltage and cur rise and falls times
Allows complex dc transients to be generated which are not possible with conventional power supplies
Supports:
Automotive transient testing per ISO16750-2
Shipboard - DO-160
Output Trigger:
Provides output trigger timing and precision event capturing
Ideal for ATE systems desiring to capture Oscilloscope waveforms
VID Control: Instruments include 8 independent programmable TTL signals which can be used for VID control or any general purpose logic controls
Soft Panels:
Advanced Labview graphical control panels
Allow for simple and efficient control and data gathering
Specifications:
Output Rationgs:
Output Voltage: 0~100V
Output Cur: 0~100A
Output Power: 5000W
Line Regulation:
Voltage: 0.01%+8mV
Cur: 0.01%+24mA
Load Regulation:
Voltage: 0.01%+12mV
Cur: 0.01%+56mA
Voltage Measurement:
Range: 20V / 100V
Accuracy: 0.05%+0.05%F.S.
Cur Measurement:
Range: 20A / 100A
Accuracy: 0.1%+0.1%F.S.
Output Noise (0-20MHz):
Voltage Ripple (P-P): 50 mV
Voltage Ripple (ms): 15 mV
Cur Ripple (ms): 40 mA
OVP Adjustment Range: 110% of Vset to 110% of Vmax
Slew Rate Range:
Voltage (with USB): 0.001V - 10V/ms
Cur (with USB): 0.001A - 2A/ms
Programming Response Time (Typical):
Rise Time (Full & No Load): 10 ms
Fall Time: 850 ms(max)
Efficiency: 0.85
Drift (8 hours):
Voltage: 0.02% of Vmax
Cur: 0.04% of Imax
Temperature Coefficient:
Voltage: 0.02% of Vmax / °C
Cur: 0.04% of Imax / °C
Transient Response Time: 3mS
10% Step Change: 250 mV
Voltage Limit @ Series Mode: 500 V
AC Input Voltage Ranges:
190 to 250Vac (3 phase 4 wire, Delta connection)
or 342 to 440Vac (3 phase 5 wire, Y connection)
Wider range of voltage & cur within the power rating of the power supply
High-speed Programming
Precision V&I Measurements
Cur sharing for parallel operation with Master/Slave Control
LXI option
Constant power operating envelope:
Provides higher curs at lower voltages
One power supply can do the job of two or three conventional supplies
No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters
High Accuracy cur readback:
No need for cur shunts/mux/DMMs to measure the converter's input cur accurately
Work benches and test systems are less complex, less costly and can cover a wider range of converters
DC Transients:
Provides programmable control over voltage and cur rise and falls times
Allows complex dc transients to be generated which are not possible with conventional power supplies
Supports:
Automotive transient testing per ISO16750-2
Shipboard - DO-160
Output Trigger:
Provides output trigger timing and precision event capturing
Ideal for ATE systems desiring to capture Oscilloscope waveforms
VID Control: Instruments include 8 independent programmable TTL signals which can be used for VID control or any general purpose logic controls
Soft Panels:
Advanced Labview graphical control panels
Allow for simple and efficient control and data gathering
Provides higher curs at lower voltages
One power supply can do the job of two or three conventional supplies
No need for both high cur/low voltage and low cur/high voltage supplies to test a family of converters
No need for cur shunts/mux/DMMs to measure the converter's input cur accurately
Work benches and test systems are less complex, less costly and can cover a wider range of converters
Provides programmable control over voltage and cur rise and falls times
Allows complex dc transients to be generated which are not possible with conventional power supplies
Supports:
Automotive transient testing per ISO16750-2
Shipboard - DO-160
Automotive transient testing per ISO16750-2
Shipboard - DO-160
Provides output trigger timing and precision event capturing
Ideal for ATE systems desiring to capture Oscilloscope waveforms
Advanced Labview graphical control panels
Allow for simple and efficient control and data gathering
Output Rationgs:
Output Voltage: 0~100V
Output Cur: 0~100A
Output Power: 5000W
Line Regulation:
Voltage: 0.01%+8mV
Cur: 0.01%+24mA
Load Regulation:
Voltage: 0.01%+12mV
Cur: 0.01%+56mA
Voltage Measurement:
Range: 20V / 100V
Accuracy: 0.05%+0.05%F.S.
Cur Measurement:
Range: 20A / 100A
Accuracy: 0.1%+0.1%F.S.
Output Noise (0-20MHz):
Voltage Ripple (P-P): 50 mV
Voltage Ripple (ms): 15 mV
Cur Ripple (ms): 40 mA
OVP Adjustment Range: 110% of Vset to 110% of Vmax
Wenn Sie mit Ihrem Kauf nicht vollständig zufrieden sind, senden Sie den Artikel einfach innerhalb von 30 Tagen nach Erhalt in seinem Originalzustand an uns zurück.
Zurückgesandte Artikel müssen unbenutzt sein und in der Originalverpackung mit allen beigefügten Unterlagen zurückgeschickt werden. Nach Erhalt erstatten wir Ihnen den vollen Betrag, abzüglich der ursprünglichen Lieferkosten. Alternativ tauschen wir den Artikel gerne um, wenn Sie dies bevorzugen.
MwSt. (Mehrwertsteuer)
Die Preise verstehen sich exklusive MwSt.
Innergemeinschaftliche Transaktionen: Gemäß der EU-Mehrwertsteuerrichtlinie sind B2B-Warenverkäufe über EU-Grenzen hinweg von der MwSt. befreit.
Wenn MwSt. berechnet wird, beträgt der Satz 23 %.
Außerhalb der EU wird keine MwSt. berechnet.