emtest
emtest NX5
Compact Immunity Test System
bis zu 5 kV Ausgangsspannung
IEC 61000-4-5, IEEE C62.41 Prüfnormen
Kombiwelle 1,2/50 µs – 8/20 µs Impulsform
2 Ω / 12 Ω Ausgangsimpedanz
bis zu 2,5 kA Maximaler Ausgangsstrom
| Attribut | Wert |
|---|---|
| Ausgangsspannung | bis zu 5 kV |
| Prüfnormen | IEC 61000-4-5, IEEE C62.41 |
| Impulsform | Kombiwelle 1,2/50 µs – 8/20 µs |
| Ausgangsimpedanz | 2 Ω / 12 Ω |
| Maximaler Ausgangsstrom | bis zu 2,5 kA |
| Wiederholrate | mindestens 1 Impuls pro Minute |
| Koppelnetzwerke | Integrierte Koppel-/Entkoppelnetzwerke für Netz- und Datenleitungen |
| Steuerung | Mikroprozessorgesteuert mit LCD-Anzeige und Software-Schnittstelle |
| Versorgungsspannung | 230 V AC, 50/60 Hz |
| Schutzklasse / Gehäuse | Tischgerät, kompakte Bauform für Laboreinsatz |
emtest NX5 Options:
- NX5 - bsp-1-300-16 - Burst, Surge, Power Fail
- NX5 - bs-1-300-16 - Burst, Surge
- NX5 - bp-1-300-16 - Burst, Power Fail
- NX5 - bst-1-300-16 - Burst, Surge, Telecom
- NX5 - bspt-1-300-16 - Burst, Surge, Power Fail, Telecom
- NX5 - b-1-300-16 - Burst
- NX5 - s-1-300-16 - Surge
- NX5 - p-1-300-32 - Power Fail
- NX5 - CCI - Capacitive coupling clamp as per IEC/EN 61000-4-4
- NX5 - CCI PVKIT 1 - Adapter set for capacitive coupling clamp calibration (includes transducer plate, support, and PVF AD 3)
- NX5 - PVF 50 - 100:1 divider, 50 ohm
- NX5 - PVF 1000 - 500:1 divider, 1,000 ohm
- NX5 - PVF BKIT 1 - Kit for burst pulse verification consisting of PVF 50, PVF 1000 and adapter for EUT port in a plastic case
- NX5 - PVF AD 1 - Adapter to match PVF 50 load resistor to the EUT supply of NX-series coupling network, 3-phase coupling network
- NX5 - ITP EF - Immunity test probes (electrical field generation)
- NX5 - ITP MF - Immunity test probe (magnetic field generation)
- NX5 - CNV 504Nx - Coupling network for 4 signal/data lines as per IEC/EN 61000-4-5 Ed 3.0
- NX5 - CNV 508Nx - Coupling network for 8 signal/data lines as per IEC/EN 61000-4-5 Ed 3.0
- NX5 - CNV 504T5 - Coupling/decoupling network for unshielded symmetrical lines (4 lines) as per IEC/EN 61000-4-5 Ed.3
- NX5 - CNV 508T5 - Coupling/decoupling network for unshielded symmetrical lines (8 lines) as per IEC/EN 61000-4-5 Ed.3
- NX5 - HSC 3-8 - Set of coupling/decoupling and protection networks for testing unshielded and shielded high-speed communication lines (Ethernet)
- NX5 - SPN 8 - Surge protection network to reduce the surge voltage to less than 10 V at the AE
- NX5 - PVS VP7 - Pulse Verification Surge, Voltage Probe 7kV Differential, 7kV Common
- NX5 - TTM 1-250-16 - Tapped autotransformer as per IEC/EN 61000-4-11 Ed.2
- NX5 - TTA 1-250-16 - Tapped autotransformer as per IEC/EN 61000-4-11 Ed.2 with automatic change of tap
- NX5 - MV 2616 - Motorized variac (0 - 250 V, 16 A)
- NX5 - MFC x - Magnetic field coil, 1 m x 1 m, MFC 1000, 1000 A/m
- NX5 - MFT 30 - Current transformer for magnetic fields up to 30 A/m
- NX5 - MFT 100 - Current transformer for magnetic fields up to 1,000 A/m
- NX5 - SVP 1700 - Calibration box for inrush current verification as per IEC/EN 61000-4-11
- NX5 - SVP 100 - 100 ohm low inductive load resistor, for rise and fall time verification
- NX5 - coupling NX5 - 3-phase coupling/decoupling networks as per IEC/EN 61000-4-4, IEC/EN 61000-4-5 and IEC/EN 61000-4-12, up to 200 A per phase
- NX5 - iec.control 1-NX - Remote control and documentation software including standard test routines and reporting capabilities; includes UOC USB-Optolink Converter
- NX5 - UOC - USB-Optolink Converter, Optical Fibre cable, 5m
| Model | NX5 |
|---|
emtest NX5 (call to reserve your availability)The emtest compact NX5 is a multifunctional test generator that meets international and product-specific transient and power fail requirements, including EFT/burst to 5.5 kV, surge to 5 kV and power fail testing.The intuitive 7" touch screen panel is the gateway to customized sequences and testing. Defined keys indicated by LED, such as start, stop and break, allow the user to run the individual configured tests quickly and accurately. Any pre-programmed standard tests can be implemented. All test parameters are displayed on-screen and the unit can also be operated remotely using the built-in Ethernet, USB or optical interface.The standalone emtest NX5 includes everything needed to conduct fully compliant tests as well as CE Marking for single-phase EUTs with an output supply of 300V/16A. Using an automatically controlled external coupling/decoupling network with a rated cur up to 200 A, this compact generator system test three-phase EUTs for added versatility.The NX5's advanced safety features make it ideal for use in industrial, medical, residential, telecom, components, broadcast and renewable energy applications. The unit, which conforms to IEC/EN 61010, includes real-time power monitoring of the EUT and a secure Ethernet or galvanic insulated OptoLink connection for reliable, safe testing.For convenience, users can choose tests from an integrated standards library; customize their own test as well as import and export documents, photos and data easily. A quick start test option is available where parameters can be changed on-line while the individual EUT is still maintained.The NX5 features fail inputs that allow users to control an ongoing test sequence based on the state of the EUT as well as monitoring outputs (BNC) that offer easy signal verification and measurements.This new compact generator is the first to recognize connected EUT power configurations and selects only couplings to real existing lines. Non-existing lines are disabled from the menu settings.A quad core ARM-Cortex A9 processor provides exceptional power optimization coupled with high performance, and the included iec.control software, supported by Windows XP, Windows Vista and Windows 7 and 8, is used for control and documentation.EM Test supplies a wide range of accessories for nearly all tests and applications.Technical Specifications of the emtest NX5 include: Smallest compact generator with 7" touch screen Intelligent, customized testing in all-in-one standalone unit Burst 5.5 kV, surge 5.0 kV and power fail Built-in single phase coupler 300V/16Av Quad core ARM-Cortex A9 processor Rated cur up to 200 A The NX5 will handle tests according to the following standards (some require additional peripheral equipment and/or options): EN 300329 EN 300340 EN 300342-1 EN 300386 V1.3.2 EN 301489-1 EN 301489-17 EN 301489-24 EN 301489-7 EN 50121 EN 55024 EN 61000-4-11 EN 61000-4-29 EN 61000-4-4 EN 61000-4-5 EN 61000-4-8 EN 61000-4-9 EN 61000-6-1 EN 61000-6-2 FCC 97-270 (part 68) IEC 60255-22-5 IEC 61000-4-11 The NX5 is a newer and improved version of the emtest UCS500N5 You may also be interestd in: Haefely ECOMPACT 4 Haefely AXOS5 Teseq NSG3060
