Hioki
Hioki MR8880-20
Memory HiCorder, 4 ch., 600 V AC/DC
20 Kanäle Anzahl der Kanäle
10 ms/Kanal (maximale Abtastrate) Messrate
±100 mV bis ±100 V (umschaltbar je nach Messbereich) Eingangsspannung
±0,1 % des Messbereichs (bei 23 °C ± 5 °C) Messgenauigkeit
Interner Speicher bis zu 1 GB (SD-Karte erweiterbar) Speicherkapazität
| Attribut | Wert |
|---|---|
| Anzahl der Kanäle | 20 Kanäle |
| Messrate | 10 ms/Kanal (maximale Abtastrate) |
| Eingangsspannung | ±100 mV bis ±100 V (umschaltbar je nach Messbereich) |
| Messgenauigkeit | ±0,1 % des Messbereichs (bei 23 °C ± 5 °C) |
| Speicherkapazität | Interner Speicher bis zu 1 GB (SD-Karte erweiterbar) |
| Eingangsimpedanz | 1 MΩ |
| Betriebstemperaturbereich | 0 °C bis +50 °C |
| Stromversorgung | 100–240 V AC, 50/60 Hz |
| Schnittstellen | USB, LAN (Ethernet), SD-Kartensteckplatz |
| Abmessungen und Gewicht | Ca. 320 mm × 210 mm × 90 mm, ca. 2,5 kg |
Hioki MR8880-20 Options:
- MR8880-20 - MR9000 - Printer Unit, printing width 100 mm, used together with the MR8880-20 main body, includes 1 roll of recording paper
- MR8880-20 - 9234 - Recording Paper, 112 mm × 18 m, roll type, 10 rolls/set
- MR8880-20 - Z1000 - Battery Pack, NiMH, charges while installed in the main unit
- MR8880-20 - Z1002 - AC Adapter, for main unit, 100 to 240 V AC
- MR8880-20 - C1003 - Carrying Case, includes compartment for options, soft case type
- MR8880-20 - L9217 - Connection Cord, insulated BNC connectors at both ends, for signal output, 1.6 m length
- MR8880-20 - 9320-01 - Logic Probe, 4-channel type, for voltage/contact signal ON/OFF detection, response pulse width 500 ns or more, miniature terminal type
- MR8880-20 - MR9321-01 - Logic Probe, 4 isolated channels, ON/OFF detection of AC/DC voltage, miniature terminal type
- MR8880-20 - P9000-01 - Differential Probe, waveform only, up to 1 kV AC/DC, bandwidth up to 100 kHz
- MR8880-20 - P9000-02 - Differential Probe, waveform/RMS value switchable, up to 1 kV AC/DC, bandwidth up to 100 kHz
- MR8880-20 - Z1008 - AC Adapter, 100 to 240 V AC (for P9000)
- MR8880-20 - 9322 - Differential Probe, for up to 1 kV AC or 2 kV DC, frequency bandwidth up to 10 MHz
- MR8880-20 - 9418-15 - AC Adapter, 100 to 240 V AC (for Differential Probe 9322)
- MR8880-20 - 9728 - PC Card 512M, 512 MB capacity (includes PC card adapter)
- MR8880-20 - 9729 - PC Card 1G, 1 GB capacity (includes PC card adapter)
- MR8880-20 - 9830 - PC Card 2G, 2 GB capacity (includes PC card adapter)
- MR8880-20 - Z4006 - USB Drive, 16 GB, long-life, high-reliability SLC Flash Memory
- MR8880-20 - 9335 - Wave Processor software, distribution media: one CD-R, Windows 10/8/7 (32/64-bit)
- MR8880-20 - L9197 - Connection Cord, φ 5.0 mm dia., cable allowing for up to 600 V input, 1.8 m length, detachable large alligator clips bundled
- MR8880-20 - L9198 - Connection Cord, φ 5.0 mm dia., cable allowing for up to 300 V input, 1.7 m length, small alligator clip
- MR8880-20 - L9790 - Connection Cord, flexible φ 4.1 mm thin dia., cable allowing for up to 600 V input, 1.8 m length (end clip sold separately)
- MR8880-20 - L9790-01 - Alligator Clip, red/black set, attaches to the ends of the cables L9790
- MR8880-20 - 9790-02 - Grabber Clip, red/black set, attaches to the ends of the cables L9790
- MR8880-20 - 9790-03 - Contact Pin, red/black set, attaches to the ends of the cables L9790
- MR8880-20 - 9243 - Grabber Clip, attaches to the tip of the banana plug cable, CAT III 1000 V, 196 mm length
- MR8880-20 - L9095 - Output Cord, connect to BNC terminal, 1.5 m length
- MR8880-20 - 3283 - Clamp On Leak HiTester, 10 mA range/10 μA resolution to 200 A range, with monitor/analog output 1 V f.s.
- MR8880-20 - 9018-50 - Clamp On Probe, good phase characteristics, frequency characteristics 40 Hz to 3 kHz, 10 to 500 A AC range, output 0.2 V AC f.s.
- MR8880-20 - 9132-50 - Clamp On Probe, frequency characteristics 40 Hz to 1 kHz, 20 to 1000 A AC range, output 0.2 V AC f.s.
- MR8880-20 - CT9667-01 - AC Flexible Current Sensor, 10 Hz to 20 kHz, 5000 A/500 A AC, 500 mV/f.s. output, φ 100 mm loop diameter
- MR8880-20 - CT9667-02 - AC Flexible Current Sensor, 10 Hz to 20 kHz, 5000 A/500 A AC, 500 mV/f.s. output, φ 180 mm loop diameter
- MR8880-20 - CT9667-03 - AC Flexible Current Sensor, 10 Hz to 20 kHz, 5000 A/500 A AC, 500 mV/f.s. output, φ 254 mm loop diameter
- MR8880-20 - CT7631 - AC/DC Current Sensor, DC, 1 Hz to 10 kHz (-3dB), 100 A, 1 mV/A output
- MR8880-20 - CT7731 - AC/DC Current Sensor (Auto zero), DC, 1 Hz to 10 kHz (-3dB), 100 A, 1 mV/A output
- MR8880-20 - CT7636 - AC/DC Current Sensor, DC, 1 Hz to 10 kHz (-3dB), 600 A, 1 mV/A output
- MR8880-20 - CT7736 - AC/DC Current Sensor (Auto zero), DC, 1 Hz to 10 kHz (-3dB), 600 A, 1 mV/A output
- MR8880-20 - CT7642 - AC/DC Current Sensor, DC, 1 Hz to 10 kHz (5 kHz), 2000 A, 1 mV/A output
- MR8880-20 - CT7742 - AC/DC Current Sensor (Auto zero), DC, 1 Hz to 10 kHz (5 kHz), 2000 A, 1 mV/A output
- MR8880-20 - CM7290 - Display Unit, provides measurement, display, and output functionality when used with CT7000 series
- MR8880-20 - CM7291 - Display Unit, with built-in Bluetooth wireless technology
- MR8880-20 - CT6875 - AC/DC Current Sensor, 2 MHz bandwidth, 500 A, high-precision pull-through type
- MR8880-20 - CT6844-05 - AC/DC Current Probe, 200 kHz bandwidth, 500 A
- MR8880-20 - CT6845-05 - AC/DC Current Probe, 100 kHz bandwidth, 500 A
- MR8880-20 - CT6846-05 - AC/DC Current Probe, 20 kHz bandwidth, 1000 A
- MR8880-20 - CT9555 - Sensor Unit, 1ch, with waveform output (power supply for current sensors)
- MR8880-20 - CT9900 - Conversion Cable, converts PL23 (10-pin) terminal to ME15W (12-pin) terminal
- MR8880-20 - SP3000-01 - Non-Contact AC Voltage Probe, 5 Vrms rated, 10 Hz to 100 kHz bandwidth
- MR8880-20 - SP3000 - Non-Contact AC Voltage Probe, sold individually
- MR8880-20 - SP9001 - AC Voltage Probe, sold individually
- MR8880-20 - 9445-02 - AC Adapter, 100 to 240 V AC
- MR8880-20 - 9445-03 - AC Adapter, for EU, 100 to 240 V AC
| Model | MR8880-20 |
|---|
Der Hioki MR8880-20 Memory HiCorder ist ein vielseitiger Datenrekorder mit CAT III 600 V Isolation, entwickelt für anspruchsvolle Umgebungen. Er unterstützt direkte Messungen bis 600V AC/DC ohne Differenzialsonde. Mit 4 vollständig isolierten Kanälen können gleichzeitig eine Dreiphasenleitung und ein zusätzlicher Kanal aufgezeichnet werden.
Dank robuster Bauweise, hoher Messgeschwindigkeit und großem Temperaturbereich ist er ideal zur Überwachung von Spannungsabfällen, Stromausfällen und komplexen elektrischen Systemen.
Testwall kann den gebrauchten Hioki MR8880-20 Memory HiCorder liefern, vollständig getestet. Mit Expertenunterstützung und weltweiter Lieferung bietet Testwall zuverlässige Messtechnik höchster Qualität. Kontaktieren Sie uns für Kalibrierung oder Reparatur des Hioki MR8880-20 Memory HiCorder.
