Isotech PEGASUS R 970

 ISOTECH PEGASUS R 970 Blackbody Calibrator

   The Isotech PEGASUS R 970 Blackbody Calibrator  is a compact furnace for calibrating radiation pyrometers.  The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity, indicates the actual radiance temperature. The sensor can be removed for external calibration or the complete system can be calibrated.  The cavity's diameter is 0.8" (20mm)  and the depth is 2.6" (65mm). The emissivity is 0.995. The cavity inside the pyrometer calibration unit is removable and a fixed-point cell may be put in its place.

   Isotech PEGASUS R 970 Blackbody Calibrator's  temperature range is 150 to 1200 °C, and it has a stability of 0.1 °C. Time to temperature is 20 minutes. A Blackbody Target Radiation Source is housed within the  PEGASUS R 970 Blackbody Calibrator for the calibration of radiation thermometers in the wave-length range of 9 to 14 micrometers. Incorporating suitable insulation within its design, this radiation source's aperture is 0.4" (10mm) in diameter. A scan across the aperture at 444 °C demonstrates the source is uniform to better than 0.3 °C.m Weighing only 15 pounds, the  Isotech PEGASUS R 970 Blackbody  Calibrator is easily carried in the field for on-site use.  The  PEGASUS R 970 can be supplied with either RS232 or RS422 communications.

Specifications for the  ISOTECH PEGASUS R 970 Blackbody Calibrator Include: