Kalmus
Kalmus LA100UF
Amplifier 100 MHz - 500 MHz 100W
10 kHz – 100 MHz Frequenzbereich
100 Watt (CW) Ausgangsleistung
Mindestens 50 dB Verstärkung
50 Ohm Eingangsimpedanz
50 Ohm Ausgangsimpedanz
| Attribut | Wert |
|---|---|
| Frequenzbereich | 10 kHz – 100 MHz |
| Ausgangsleistung | 100 Watt (CW) |
| Verstärkung | Mindestens 50 dB |
| Eingangsimpedanz | 50 Ohm |
| Ausgangsimpedanz | 50 Ohm |
| Versorgungsspannung | 115/230 V AC, 50/60 Hz |
| Betriebstemperatur | 0 °C bis +50 °C |
| Kühlung | Erzwungene Luftkühlung (Lüfter) |
| Abmessungen (B x H x T) | 483 mm x 133 mm x 432 mm (19 Zoll Rack, 3 HE) |
| Gewicht | Ca. 18 kg |
Kalmus LA100UF Options:
- LA100UF - Option 110-1E - GPIB IEEE-488, RS232 and Ethernet Remote Control
- LA100UF - Option 110-2 - GPIB IEEE-488 and RS 422 Remote Control
- LA100UF - Option 110-3 - GPIB IEEE-488 and RS 485 Remote Control
- LA100UF - Option 113 - Chassis slides for a 19" rack mounting
- LA100UF - Option 118A - RF Input On Front Output On Rear
- LA100UF - Option 118B - RF Input On Rear Output On Front
| Model | LA100UF |
|---|
The Kalmus LA100UF RF Amplifier was designed for applications in communications, EMC testing, NMR/MRI and general laboratory use. Features of the Kalmus LA100UF Amplifier include: Broad bandwidth Linear operation Low compression at rated power VSWR protection No band switching Rack mountable GPIB & RS232 (optional) Blanking Remote capability RF gain control Automatic leveling (ALC) Safety interlock input Optional rear panel connectors Integrated RF power meter Rugged RF power MOSFET design Benefits of the Kalmus LA100UF Amplifier include: Wide instantaneous bandwidth for sweep applications, pulse and CW operation Delivers rated power with low distortion Low RF leakage reduces possible interference with equipment in close proximity RF power sensors prevent overdrive and protect amplifier, and load, in high VSWR conditions Fully featured remote capability allows control and monitoring of all front panel functions Specifications of the Kalmus LA100UF include: Frequency: 100 - 500 MHz Power: 100W Power Gain: 50 dB Gain Flatness: Gain Control: 20 dB ALC: Yes Amplifier Class: AB System Impedance: 50 Ohm Input for Full Output: 1 - 2 mW Spurious (maximum): -70 dBc Harmonics: -16 dBc Protection: Temp, VSWR Operating Temp: -10 to 40° C Connectors: N Female Cooling: Forced Air Meter: Fwd: 100 W; Refl: % limit Indicators: AC Line, Blanking, Meter, ALC, VSWR, Temp, Remote Active ±2.5 dB (unleveled) ±0.5 dB (leveled)
- ±2.5 dB (unleveled)
- ±0.5 dB (leveled)
