Manufacturer Logo
Keysight (Agilent)

Keysight (Agilent) 83640A

Synthesized Sweep Signal Generator, 10 MHz - 40 GHz
10 MHz – 40 GHz Frequenzbereich
+10 dBm Ausgangsleistung (maximal)
1 Hz Frequenzauflösung
-80 dBc/Hz bei 10 kHz Abstand (typisch) Phasenrauschen
50 Ohm Ausgangsimpedanz
Datenblatt anfordern
Attribut Wert
Frequenzbereich 10 MHz – 40 GHz
Ausgangsleistung (maximal) +10 dBm
Frequenzauflösung 1 Hz
Phasenrauschen -80 dBc/Hz bei 10 kHz Abstand (typisch)
Ausgangsimpedanz 50 Ohm
Frequenzgenauigkeit ±1 ppm (intern referenziert)
Amplitudenmodulation (AM) Intern und extern steuerbar
Frequenzmodulation (FM) Intern und extern steuerbar
Schnittstellen GPIB (IEEE 488), RS-232
Stromversorgung 100–240 V AC, 50/60 Hz
Keysight (Agilent) 83640A Options:
  • 83640A - 001 - Add Step Attenuator
  • 83640A - 002 - Internal Modulation Generator
  • 83640A - 003 - Delete Front Panel Keyboard/Display
  • 83640A - 004 - Rear Panel RF Output
  • 83640A - 006 - Fast Pulse Modulation
  • 83640A - 008 - 1 Hz Frequency Resolution
  • 83640A - 700 - Mate System Compatibility
  • 83640A - W30 - Extended Repair Service
Kalibrierungsformular Keysight (Agilent) 83640A

Reparaturformular Keysight (Agilent) 83640A
Maximum file size: 40MB

Keine verwandten Beiträge

Weitere Informationen
Model83640A

The HP/Agilent 83640A synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. It delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis, enabling the Agilent 83640A to achieve low single-sideband phase noise performance.

Other features and specifications include:

  • Scan modulation to simulate antenna scan patterns
  • Accurate fixed and swept frequency offset for two-tone measurement  
  • User flatness correction for leveling at remote points in the test system  
  • General purpose source for use in component test, receiver test and for frequency conversion  
  • Frequency range: 10 MHz to 40 GHz  
  • Sweep modes: Step, List, Ramp  
  • Maximum power: < 26.5 GHz: +10 dBm  
  • Maximum power: > 26.5 GHz: +6.0 dBm  
  • Power sweep range: -20 dBm to maximum power  
  • Phase noise (38 GHz at 10 KHz): -70 dBc  
  • Max FM deviation (locked): +/- 8 MHz

 

Other model in this series:

Clicky Copyright © 2013-present Magento, Inc. All rights reserved.