Keysight (Agilent) E5057A

| Attribut | Wert |
|---|---|
| Frequenzbereich | 10 MHz bis 3 GHz |
| Anzahl der Kanäle | 4 Kanäle |
| Phasenrauschen | -185 dBc/Hz (normalisiertes Bodenrauschen) |
| Dynamikbereich | Bis zu 90 dB |
| Messparameter | Phasenrauschen, Frequenzstabilität, AM-Rauschen |
| Eingangsimpedanz | 50 Ohm |
| Referenzeingang | 10 MHz externer Referenzeingang |
| Schnittstellen | LAN, USB, GPIB |
| Betriebstemperatur | 0 °C bis 55 °C |
| Stromversorgung | 100–240 V AC, 50/60 Hz |
Keysight (Agilent) E5057A Options:
- 1-port or 2-port configuration (2-port adds vector network analysis)
- Standard or enhanced low phase noise configuration
- GPIB interface
- Core software (mandatory) - phase noise, AM noise and baseband noise measurements
- Advanced features - cross-correlation 2 to 100,000, transient measurements, VCO characterization, spectrum monitor
- Full-span spectrum analysis
- S96302B - Precision jitter analysis
- S96325B - Pulsed-RF AM/PM noise measurements
Keysight (Agilent) E5057A SSA-X Signal Source Analyzer, 1 MHz to 44 GHz
The Keysight E5057A is a member of the SSA-X signal source analyzer family, extending the platform introduced with the E5055A to 44 GHz. It is a bench-top phase noise and signal source analyzer for wireless communications, radar, aerospace and defense and high-speed digital applications, offering a frequency range of 1 MHz to 44 GHz, phase noise offset frequencies from 0.01 Hz to more than 1 GHz, and phase noise sensitivity of -171 dBc/Hz (typical, 16 GHz carrier, 1 MHz offset).
An ultra-low noise floor and the cross-correlation method give accurate, repeatable phase noise measurements, while flexible measurement settings and a modern touch-screen user interface improve throughput. A built-in clean internal source with path-delay compensation supports residual (additive) phase noise measurements, and two clean DC voltage channels plus tuning voltage outputs make VCO characterisation straightforward. Optional capabilities include a 2-port VNA, S96302B precision jitter analysis and compatibility with E5001A SSA-J software.
Specifications for the Keysight (Agilent) E5057A Signal Source Analyzer include:
| Frequency Range | 1 MHz to 44 GHz |
| Offset Frequency Range | 0.01 Hz to >1 GHz |
| Input Power Range | -50 dBm to +20 dBm (typ.) |
| Phase Noise Sensitivity | -171 dBc/Hz at 16 GHz, 1 MHz offset (typ.) |
| Measurement Method | Cross-correlation, with internal reference source |
| DC Outputs | 2 x clean DC supply plus tuning voltage outputs |
Image shows the E5055A; the E5057A shares the same SSA-X chassis.





