Keysight (Agilent)
Keysight (Agilent) ECP-E26A
Power Sensor, 50 MHz - 26.5 GHz, -70 to 20 dBm
50 MHz bis 26,5 GHz Frequenzbereich
-70 bis +20 dBm Leistungsbereich
+23 dBm (200 mW) Maximale Leistung
3,5 mm Stecker Anschluss
38 × 30 × 102 mm Abmessungen (B × H × T)
| Attribut | Wert |
|---|---|
| Frequenzbereich | 50 MHz bis 26,5 GHz |
| Leistungsbereich | -70 bis +20 dBm |
| Maximale Leistung | +23 dBm (200 mW) |
| Anschluss | 3,5 mm Stecker |
| Abmessungen (B × H × T) | 38 × 30 × 102 mm |
| Sensortyp | Diode, Mittelwert (CW), großer Dynamikbereich |
| SWR | 1,19 max. bei 100 MHz bis 8 GHz; 1,26 max. bei 18 bis 26,5 GHz |
| Kompatible Leistungsmesser | EPM E4418A/B, E4419A/B, EPM-P E4416A/E4417A, N1913A/N1914A, P-Serie |
| Gewicht | 0,18 kg |
Kompatible Leistungsmesser
The Agilent ECP-26A (aka E4413A) diode power sensor, with wide dynamic range, is designed for use with the EPM and EPM-P series power meters for power measurements on CW signals from 50 MHz to 26.5 GHz. The HP E4413A power sensor provides extremely low SWR to minimize the source and sensor mismatch errors. Also, for comprehensive error correction, the calibration factors, linearity and temperature error-correction information are stored in EEPROM.
Specifications of the Agilent ECP-26A Power Sensor include:
- Frequency range: 50 MHz to 26.5 GHz
- Measurement range: 100 pW to 100 mW ( -70 dBm to +20 dBm)
- 50 ohm input impedance
- 3.5mm (m) connector
- Calibration factors stored in EEPROM
- Compatible with the EPM and EPM-P series power meters
