Keysight (Agilent) N7552A
| Attribut | Wert |
|---|---|
| Frequenzbereich | 100 MHz bis 20 GHz |
| Ausgangsleistung | bis zu +20 dBm |
| Modulationsarten | AM, FM, PM, Pulsmodulation |
| Frequenzauflösung | 0,001 Hz |
| Phasenrauschen | -110 dBc/Hz bei 10 kHz Trägerabstand (typisch) |
| Ausgangsanschluss | N-Typ (50 Ohm) |
| Frequenzgenauigkeit | ±1 ppm (intern referenziert) |
| Harmonische Oberwellen | ≤ -30 dBc |
| Betriebstemperaturbereich | 0 °C bis +55 °C |
| Stromversorgung | 100–240 V AC, 50/60 Hz |
Keysight (Agilent) N7552A Options:
- N7552A - 3FF - Both 3.5 mm connectors are female on module
- N7552A - 3MF - 1 female and 1 male connector on module, both 3.5 mm
- N7552A - 3MM - Both 3.5 mm connectors are male on module
- N7552A - NFF - Both Type-N, 50 Ω connectors are female on module
- N7552A - NMF - 1 female and 1 male connector on module, both Type-N, 50 Ω
- N7552A - NMM - Both Type-N, 50 Ω connectors are male on module
- N7552A - 150 - Plastic storage box
- N7550X-151 - 3.5 or 2.92 mm torque wrench
- N7550X-152 - Type-N torque wrench
| Model | N7552A |
|---|
Keysight (Agilent) N7552A Electronic Calibration Module
The N7552A is part of Keysight's family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. The N7552A supports Keysight's , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7552A is a 2-port ECal module that supports 3.5 mm connectors or Type N connectors. he firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
Specifications for the Keysight (Agilent) N7552A Electronic Calibration Module Include:
| Frequency | DC to 9 GHz |
| Ports | 2 |
| Connector Type | 3.5mm, Type N |
