Keysight (Agilent) N7554A
| Attribut | Wert |
|---|---|
| Frequenzbereich | 2 MHz – 26,5 GHz |
| Anzahl der Kanäle | 4 Kanäle |
| Dynamischer Bereich | Bis zu 105 dB |
| Ausgangsleistung | -85 dBm bis +20 dBm |
| Messparameter | S-Parameter, Verstärkung, Phase, Grupplaufzeit |
| Schnittstellentyp | USB, LAN (LXI), GPIB |
| Anschlusstyp | 3,5 mm (f) / SMA-kompatibel |
| Spuranzahl (Traces) | Bis zu 16 Messkurven gleichzeitig |
| Betriebstemperaturbereich | 0 °C bis +55 °C |
| Stromversorgung | 100–240 V AC, 50/60 Hz |
Keysight (Agilent) N7554A Options:
- N7554A - 3FF - Both 3.5 mm connectors are female on module
- N7554A - 3MF - 1 female and 1 male connector on module, both 3.5 mm
- N7554A - 3MM - Both 3.5 mm connectors are male on module
- N7554A - NFF - Both Type-N, 50 Ω connectors are female on module
- N7554A - NMF - 1 female and 1 male connector on module, both Type-N, 50 Ω
- N7554A - NMM - Both Type-N, 50 Ω connectors are male on module
- N7554A - 150 - Plastic storage box
- N7550X-151 - 3.5 or 2.92 mm torque wrench
- N7550X-152 - Type-N torque wrench
| Model | N7554A |
|---|
Keysight (Agilent) N7554A Electronic Calibration Module
The N7554A is part of Keysight's family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. The N7554A supports Keysight's , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7554A is a 2-port ECal module that supports 3.5 mm connectors or Type N connectors. The firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
Specifications for the Keysight (Agilent) N7554A Electronic Calibration Module Include:
| Frequency Range | DC to 18 GHz |
| Ports | 2 |
| Connector Types | Type N or 3.5mm |
