Keysight (Agilent) N7555A
| Attribut | Wert |
|---|---|
| Frequenzbereich | bis zu 70 GHz |
| Gerätekategorie | Optischer Zeitbereichsreflektometer (OTDR) |
| Wellenlänge | 1310 nm / 1550 nm |
| Dynamikbereich | bis zu 45 dB |
| Entfernungsbereich | bis zu 260 km |
| Toter Bereich (Ereignis) | ca. 0,8 m |
| Toter Bereich (Dämpfung) | ca. 4 m |
| Ausgangsleistung | bis zu +7 dBm |
| Schnittstelle | USB, LAN (GPIB optional) |
| Anzeigeauflösung | 0,001 dB |
Keysight (Agilent) N7555A Options:
- N7555A - 3FF - Both 3.5 mm connectors are female on module
- N7555A - 3MF - 1 female and 1 male connector on module, both 3.5 mm
- N7555A - 3MM - Both 3.5 mm connectors are male on module
- N7555A - 150 - Plastic storage box
- N7550X-151 - 3.5 or 2.92 mm torque wrench
- N7550X-152 - Type-N torque wrench
| Model | N7555A |
|---|
Keysight (Agilent) N7555A Electronic Calibration Module
The Keysight N7555A is part of Keysight's family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. The N7555A supports Keysight's , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7555A is a 2-port ECal module that supports 3.5 mm connectors.The firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
Specifications for the Keysight (Agilent) N7555A Electronic Calibration Module Include:
| Frequency Range | DC to 26.5 GHz |
| Number of Ports | 2 |
| Connector Type | 3.5mm |
| Connector mix | M-M; M-F; F-F |
