Manufacturer Logo
Keysight (Agilent)

Keysight (Agilent) N5511A

Phase Noise Test System (PNTS), 50 kHz to 40 GHz
50 kHz to 40 GHz (internal phase detectors); above 100 GHz with external phase detectors Frequency Range
0.01 Hz to 160 MHz (wider offsets with an external signal analyser) Offset Frequency Range
-200 dBc/Hz (with +23 dBm input signal) Phase Noise Sensitivity
Down to kT (-177 dBm/Hz) Thermal Noise Floor
Phase detector (quadrature) method with multi-segment FPGA cross-correlation Measurement Method

The Keysight (Agilent) N5511A Phase Noise Test System (PNTS) is Keysight's high-end phase noise measurement platform and the successor to the E5500 series. It measures absolute and residual phase noise from 50 kHz to 40 GHz with its internal phase detectors (beyond 100 GHz with external phase detectors), at offsets from 0.01 Hz to 160 MHz, with sensitivity of -200 dBc/Hz using a +23 dBm input signal, down to the kT thermal floor of -177 dBm/Hz.

Using the phase detector (quadrature) method with multi-segment FPGA cross-correlation, the N5511A characterises one-port devices such as VCOs, DROs, crystal oscillators and synthesizers, and two-port devices such as amplifiers, frequency converters and dividers, on CW and pulsed signals. Its modular PXIe architecture accepts any electronically tunable reference source, adds AM, baseband and residual noise measurements, and is SCPI backward compatible with the E5505A for easy migration from legacy E5500 systems.

Testwall can supply the used Keysight (Agilent) N5511A, fully tested. With expert support and fast delivery across Europe, Testwall provides high-performance instrumentation you can rely on. Please contact us directly if you need calibration or repair of the Keysight (Agilent) N5511A.

Clicky
Copyright © 2013-present Magento, Inc. All rights reserved.