Kikusui
Kikusui PLZ334W
DC Electronic Load, 1.5 - 150V, 66A, 330W
300 W Maximale Leistung
150 V Maximale Spannung
60 A Maximaler Strom
1 V Minimale Betriebsspannung
Konstantstrom (CC), Konstantspannung (CV), Konstantwiderstand (CR), Konstantleistung (CW) Betriebsmodi
950,00 € zzgl. MwSt. + kostenlose EU-Lieferung
| Attribut | Wert |
|---|---|
| Maximale Leistung | 300 W |
| Maximale Spannung | 150 V |
| Maximaler Strom | 60 A |
| Minimale Betriebsspannung | 1 V |
| Betriebsmodi | Konstantstrom (CC), Konstantspannung (CV), Konstantwiderstand (CR), Konstantleistung (CW) |
| Eingangsschnittstelle | RS-232C, GP-IB (optional), USB |
| Anzahl der Kanäle | 1 |
| Schutzfunktionen | Überspannungsschutz (OVP), Überstromschutz (OCP), Überhitzungsschutz (OHP) |
| Abmessungen (B x H x T) | 213 mm x 88 mm x 351 mm |
| Gewicht | ca. 5,5 kg |
Kikusui PLZ334W Options:
- PLZ334W - PC01-PLZ-4W - Parallel cable (for connecting units in parallel operation)
- PLZ334W - OP01-PLZ-4W - Accessory kit for external analog input interface (MIL-standard 20-pin connector)
- PLZ334W - KRA3 - Rack mount kit for EIA-compliant rack (Type I)
- PLZ334W - KRA150 - Rack mount kit for JIS-compliant rack (Type I)
| Model | PLZ334W |
|---|
KIKUSUI PLZ334W DC ELECTRONIC LOAD The Kikusui PLZ334W DC Electronic Load is a multifunctional system designed to offer the highest levels of reliability and safety to meet all the testing demands, simulating loads for the characteristic, performance, life cycle, and aging test applications. In Addition to offering high-speed response at a maximum slew rate of 16 A/µs, the Kikusui PLZ334W is capable of operating in 6 diffe modes including constant voltage, constant cur, constant power and constant resistance mode. Its control unit comes with GPIB, RS232C and USB as standard equipment. The built-in three-range configuration of the Kikusui PLZ334W electronic DC load provides both wide dynamic range and high precision. The Kikusui PLZ334W can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. The voltmeter, ammeter and wattmeter functions display values at 5 digits with a minimum setting resolution of 10µA. Under parallel operation, the same model can be parallel connected to a maximum of 5 units when booster unit is not used. (Max. 5kW, 1000A). Specifications of the Kikusui PLZ334W DC Electronic Load include:
