Rohde & Schwarz
Rohde & Schwarz FSQ26
20Hz - 26GHz Spectrum Analyser
20 Hz – 26,5 GHz Frequenzbereich
bis zu 173 dB Anzeigebereich (Dynamikbereich)
-155 dBm (1 Hz Bandbreite) Rauschmaß (typisch)
bis zu 120 MHz Analysebandbreite
-130 dBc/Hz (bei 10 kHz Abstand, 1 GHz Träger) Phasenrauschen
| Attribut | Wert |
|---|---|
| Frequenzbereich | 20 Hz – 26,5 GHz |
| Anzeigebereich (Dynamikbereich) | bis zu 173 dB |
| Rauschmaß (typisch) | -155 dBm (1 Hz Bandbreite) |
| Analysebandbreite | bis zu 120 MHz |
| Phasenrauschen | -130 dBc/Hz (bei 10 kHz Abstand, 1 GHz Träger) |
| Auflösebandbreite (RBW) | 1 Hz – 50 MHz |
| Eingangsimpedanz | 50 Ohm |
| Maximaler Eingangspegel | +30 dBm (1 W) |
| Referenzpegel | -130 dBm bis +30 dBm |
| Frequenzgenauigkeit | ±0,5 ppm (nach Kalibrierung) |
Rohde & Schwarz FSQ26 Options:
- FSQ26 - FSU-B4 - Low-Aging OXCO
- FSQ26 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSQ26 - FSP-B10 - External Generator Control
- FSQ26 - FSU-B12 - Attenuator for Tracking Generator R&S FSU-B9
- FSQ26 - FSQ-B18 - Removable Hard Disk
- FSQ26 - FSQ-B19 - Second Hard Disk for R&S FSQ-B18
- FSQ26 - FSU-B21 - LO/IF Ports for External Mixers
- FSQ26 - FSQ-B23 - RF Preamplifier, 3.6 GHz to 26 GHz, for R&S FSQ 26
- FSQ26 - FSU-B25 - Electronic Attenuator, 0 dB to 30 dB, and 20 dB preamplifier
- FSQ26 - FSQ-B71 - Analog Baseband Inputs
- FSQ26 - FSQ-B72 - I/Q Bandwidth Extension to 60 MHz/120 MHz
- FSQ26 - FS-K5 - Modulation and spectrum measurements on GSM/EDGE base station and mobile signals
- FSQ26 - FS-K8 - Bluetooth transmitter measurements
- FSQ26 - FS-K9 - Power sensor measurements (supports R&S NRP-Z11/-Z21 with R&S NRP-Z4 USB adapter)
- FSQ26 - FS-K30 - Noise figure measurements (application firmware), remote-controllable
- FSQ26 - FS-K72 - Modulation and code domain power measurements to 3GPP TS 24.141 on base station signals (node B)
- FSQ26 - FS-K73 - Modulation and code domain power measurements to 3GPP TS 25.121 on mobile station signals (UE)
- FSQ26 - FS-K74 - HSDPA extension for R&S FS-K72
- FSQ26 - FS-K76 - Modulation and code domain power measurements on TD-SCDMA base station signals
- FSQ26 - FS-K77 - Modulation and code domain power measurements on TD-SCDMA mobile station signals (UE)
- FSQ26 - FS-K82 - Modulation and code domain power measurements to cdma2000/3GPP2 on base station signals (also for IS-95/cdmaOne signals)
- FSQ26 - FS-K83 - Modulation and code domain power measurements on cdma2000/1xEV-DV mobile station signals (UE)
- FSQ26 - FS-K84 - Modulation and code domain power measurements on cdma2000/1xEV-DO mobile station signals (UE)
- FSQ26 - FS-K85 - Modulation and code domain power measurements to 1xEV-DO on base station signals
- FSQ26 - FS-K4 - Phase noise measurements (Windows software)
- FSQ26 - FS-K7 - AM/FM/φM measurement demodulator with measurement of modulation frequency, THD, SINAD and spectrum (FFT) of the demodulated signal
- FSQ26 - FSQ-K70 - Universal vector signal analysis, FSK, MSK, BPSK, up to 256QAM, symbol rates up to 25 Msymbol/s (up to 81.6 Msymbol/s with R&S FSQ-B72)
- FSQ26 - FSQ-K91 - Modulation and spectrum measurements on WLAN signals to 802.11 a/b/g/j
| Model | FSQ26 |
|---|
Der Rohde & Schwarz FSQ26 deckt 20 Hz bis 26,5 GHz ab und bietet bis zu 120 MHz Bandbreite. Unterstützt GSM, LTE, CDMA2000 und WiMAX.
Ideal für digitale Demodulation und schnelle Signalanalyse.
Testwall liefert gebrauchte, getestete FSQ26-Geräte. Kontaktieren Sie uns für Kalibrierung oder Reparatur.
