Rohde & Schwarz FSQ3
| Attribut | Wert |
|---|---|
| Frequenzbereich | 20 Hz – 3 GHz |
| Auflösungsbandbreite | 10 Hz – 10 MHz |
| Anzeigebereich (Dynamikbereich) | bis zu 150 dB |
| Phasenrauschen | -130 dBc/Hz (bei 10 kHz Trägerabstand, 1 GHz) |
| Eingangsimpedanz | 50 Ohm |
| Maximaler Eingangspegel | +30 dBm (1 W) |
| Videobandbreite | 1 Hz – 10 MHz |
| Messempfänger-Funktionalität | Ja, integrierter Vektorsignalanalysator |
| Bildschirm | 10,4-Zoll-Farb-TFT-Display |
| Schnittstellen | GPIB, RS-232, USB, LAN (optional) |
Rohde & Schwarz FSQ3 Options:
- FSQ3 - FSU-B4 - Low-Aging OXCO
- FSQ3 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSQ3 - FSP-B10 - External Generator Control
- FSQ3 - FSU-B12 - Attenuator for Tracking Generator R&S FSU-B9
- FSQ3 - FSQ-B18 - Removable Hard Disk
- FSQ3 - FSQ-B19 - Second Hard Disk for R&S FSQ-B18
- FSQ3 - FSU-B21 - LO/IF Ports for External Mixers
- FSQ3 - FSQ-B23 - RF Preamplifier, 3.6 GHz to 26 GHz, for R&S FSQ 26
- FSQ3 - FSU-B25 - Electronic Attenuator, 0 dB to 30 dB, and 20 dB preamplifier
- FSQ3 - FSQ-B71 - Analog Baseband Inputs
- FSQ3 - FSQ-B72 - I/Q Bandwidth Extension to 60 MHz/120 MHz
- FSQ3 - FS-K4 - Phase noise measurements (Windows software)
- FSQ3 - FS-K5 - Modulation and spectrum measurements on GSM/EDGE base station and mobile signals
- FSQ3 - FS-K7 - AM/FM/φM measurement demodulator with measurement of modulation frequency, THD, SINAD and spectrum (FFT) of the demodulated signal
- FSQ3 - FS-K8 - Bluetooth transmitter measurements
- FSQ3 - FS-K9 - Power sensor measurements (supports R&S NRP-Z11/-Z21 with R&S NRP-Z4 USB adapter)
- FSQ3 - FS-K30 - Noise figure measurements (application firmware), remote-controllable
- FSQ3 - FS-K72 - Modulation and code domain power measurements to 3GPP TS 24.141 on base station signals (node B)
- FSQ3 - FS-K73 - Modulation and code domain power measurements to 3GPP TS 25.121 on mobile station signals (UE)
- FSQ3 - FS-K74 - HSDPA extension for R&S FS-K72
- FSQ3 - FS-K76 - Modulation and code domain power measurements on TD-SCDMA base station signals
- FSQ3 - FS-K77 - Modulation and code domain power measurements on TD-SCDMA mobile station signals (UE)
- FSQ3 - FS-K82 - Modulation and code domain power measurements to cdma2000/3GPP2 on base station signals (also for IS-95/cdmaOne signals)
- FSQ3 - FS-K83 - Modulation and code domain power measurements on cdma2000/1xEV-DV mobile station signals (UE)
- FSQ3 - FS-K84 - Modulation and code domain power measurements on cdma2000/1xEV-DO mobile station signals (UE)
- FSQ3 - FS-K85 - Modulation and code domain power measurements to 1xEV-DO on base station signals
- FSQ3 - FSQ-K70 - Universal vector signal analysis, FSK, MSK, BPSK, up to 256QAM, symbol rates up to 25 Msymbol/s (up to 81.6 Msymbol/s with R&S FSQ-B72)
- FSQ3 - FSQ-K91 - Modulation and spectrum measurements on WLAN signals to 802.11 a/b/g/j
| Model | FSQ3 |
|---|
Der Rohde & Schwarz FSQ3 ist ein leistungsstarker Signalanalysator mit einem Bereich von 20 Hz bis 3,6 GHz, RBW von 1 Hz bis 50 MHz und DANL von -158 dBm. Er bietet eine Demodulationsbandbreite von 120 MHz und eignet sich ideal für WLAN-, 3GPP-, GSM-MCPA- und WiMAX-Anwendungen. Erweiterte digitale Radioanalysefunktionen sind integriert.
Unterstützt 2G-, 2.5G- und 3G-Systeme über Firmware wie GSM/EDGE, 3GPP FDD, HSDPA, CDMA2000 und TD-SCDMA. Bedienung wie bei FSU und FSP, mit GPIB/IEC-Kompatibilität.
Testwall liefert den gebrauchten Rohde & Schwarz FSQ3, vollständig getestet. Mit fachkundigem Support und weltweitem Versand bietet Testwall leistungsstarke Messtechnik mit hoher Zuverlässigkeit. Kontaktieren Sie uns für Kalibrierung oder Reparatur des Rohde & Schwarz FSQ3.
