Rohde & Schwarz FSQ8
| Attribut | Wert |
|---|---|
| Frequenzbereich | 20 Hz – 8 GHz |
| Anzeigebereich (Display Range) | 100 Hz – 8 GHz |
| Auflösebandbreite (RBW) | 1 Hz – 50 MHz |
| Videobandbreite (VBW) | 1 Hz – 50 MHz |
| Anzeigedynamik | 170 dB |
| Phasenrauschen | -130 dBc/Hz (bei 10 kHz Abstand, 1 GHz Träger) |
| Eingangsimpedanz | 50 Ohm |
| Maximaler Eingangspegel | +30 dBm (Dauerbetrieb) |
| Messempfänger-Funktionalität | Ja, mit CISPR-konformen Detektoren (Peak, Quasi-Peak, Average) |
| Stromversorgung | 100 – 240 V AC, 50/60 Hz |
Rohde & Schwarz FSQ8 Options:
- FSQ8 - FSU-B4 - Low-Aging OXCO
- FSQ8 - FSU-B9 - Tracking Generator, 100 kHz to 3.6 GHz
- FSQ8 - FSP-B10 - External Generator Control
- FSQ8 - FSU-B12 - Attenuator for Tracking Generator R&S FSU-B9
- FSQ8 - FSQ-B18 - Removable Hard Disk
- FSQ8 - FSQ-B19 - Second Hard Disk for R&S FSQ-B18
- FSQ8 - FSU-B21 - LO/IF Ports for External Mixers
- FSQ8 - FSQ-B23 - RF Preamplifier, 3.6 GHz to 26 GHz, for R&S FSQ 26
- FSQ8 - FSU-B25 - Electronic Attenuator, 0 dB to 30 dB, and 20 dB preamplifier
- FSQ8 - FSQ-B71 - Analog Baseband Inputs
- FSQ8 - FSQ-B72 - I/Q Bandwidth Extension to 60 MHz/120 MHz
- FSQ8 - FS-K4 - Phase noise measurements (Windows software)
- FSQ8 - FS-K5 - Modulation and spectrum measurements on GSM/EDGE base station and mobile signals
- FSQ8 - FS-K7 - AM/FM/φM measurement demodulator with measurement of modulation frequency, THD, SINAD and spectrum (FFT) of the demodulated signal
- FSQ8 - FS-K8 - Bluetooth transmitter measurements
- FSQ8 - FS-K9 - Power sensor measurements (supports R&S NRP-Z11/-Z21 with R&S NRP-Z4 USB adapter)
- FSQ8 - FS-K30 - Noise figure measurements (application firmware), functions similar to R&S FS-K3, but remote-controllable
- FSQ8 - FS-K72 - Modulation and code domain power measurements to 3GPP TS 24.141 on base station signals (node B)
- FSQ8 - FS-K73 - Modulation and code domain power measurements to 3GPP TS 25.121 on mobile station signals (UE)
- FSQ8 - FS-K74 - HSDPA extension for R&S FS-K72
- FSQ8 - FS-K76 - Modulation and code domain power measurements on TD-SCDMA base station signals
- FSQ8 - FS-K77 - Modulation and code domain power measurements on TD-SCDMA mobile station signals (UE)
- FSQ8 - FS-K82 - Modulation and code domain power measurements to cdma2000/3GPP2 on base station signals (also for measurements on IS-95/cdmaOne signals)
- FSQ8 - FS-K83 - Modulation and code domain power measurements on cdma2000/1xEV-DV mobile station signals (UE)
- FSQ8 - FS-K84 - Modulation and code domain power measurements on cdma2000/1xEV-DO mobile station signals (UE)
- FSQ8 - FS-K85 - Modulation and code domain power measurements to 1xEV-DO on base station signals
- FSQ8 - FSQ-K70 - Universal vector signal analysis, FSK, MSK, BPSK, up to 256QAM, symbol rates up to 25 Msymbol/s (up to 81.6 Msymbol/s with R&S FSQ-B72)
- FSQ8 - FSQ-K91 - Modulation and spectrum measurements on WLAN signals to 802.11 a/b/g/j
| Model | FSQ8 |
|---|
Der Rohde & Schwarz FSQ8 bietet einen Frequenzbereich von 20 Hz bis 8 GHz, eine RBW von 1 Hz bis 50 MHz und eine Demodulationsbandbreite bis 120 MHz. Mit einem DANL von -154 dBm ermöglicht er detaillierte Signalanalysen und bietet zahlreiche Mess- und Digitalradiooptionen.
Ideal für WLAN, GSM-MCPA, WiMAX und 3GPP-Systeme, unterstützt er die Analyse von 2G-, 2.5G- und 3G-Technologien mit optionaler Firmware für GSM/EDGE, CDMA2000, HSDPA und TD-SCDMA.
Testwall kann das gebrauchte Rohde & Schwarz FSQ8 liefern, vollständig getestet. Mit fachkundiger Unterstützung und weltweitem Versand bietet Testwall leistungsstarke Messgeräte mit unvergleichlicher Zuverlässigkeit und Servicequalität. Bitte kontaktieren Sie uns direkt, wenn Sie eine Kalibrierung oder Reparatur des Rohde & Schwarz FSQ8 benötigen.
