Rohde & Schwarz FSVA30
| Attribut | Wert |
|---|---|
| Frequenzbereich | 10 Hz – 30 GHz |
| Anzeigebereich (Dynamikbereich) | Bis zu 78 dB (typisch) |
| Anzeigebereich der Eingangsleistung | -130 dBm bis +30 dBm |
| Phasenrauschen | -112 dBc/Hz bei 10 kHz Trägerabstand (typisch, 1 GHz) |
| Analysebandbreite (Echtzeit) | Bis zu 200 MHz |
| Auflösebandbreite (RBW) | 1 Hz – 50 MHz |
| Eigenrauschen (DANL) | -165 dBm/Hz (typisch, mit Vorverstärker) |
| Eingangsimpedanz | 50 Ohm |
| Max. Eingangsleistung (Dauerbetrieb) | +30 dBm (1 W) |
| Schnittstellen und Konnektivität | LAN (1 Gbit/s), USB, GPIB (optional), DisplayPort |
Rohde & Schwarz FSVA30 Options:
- FSVA30 - FSV-B1 - Ruggedized housing
- FSVA30 - FSV-B3 - Audio demodulator
- FSVA30 - FSV-B4 (model .02) - OCXO reference frequency
- FSVA30 - FSV-B4 (model .03) - OCXO extended frequency stability
- FSVA30 - FSV-B5 - Additional interfaces (IF out, video out, AUX port, trigger out, 2 × USB)
- FSVA30 - FSV-B9 - Tracking generator, 100 kHz to 7 GHz
- FSVA30 - FSV-B10 - External generator control (excludes R&S FSV-B160)
- FSVA30 - FSVA-B11 - YIG preselector bypass (for R&S FSVA30)
- FSVA30 - FSV-B14 - Ultra-high precision frequency reference (excludes R&S FSV-B160)
- FSVA30 - FSV-B17 - Digital baseband interface
- FSVA30 - FSV-B18 - Solid-state drive (removable hard drive)
- FSVA30 - FSV-B21 - LO/IF ports for external mixers
- FSVA30 - FSV-B22 - RF preamplifier, 9 kHz to 7 GHz
- FSVA30 - FSV-B24 - RF preamplifier, 9 kHz to 30 GHz
- FSVA30 - FSV-B25 - Electronic attenuator, 1 dB steps
- FSVA30 - FSV-B30 - DC power supply for 12 V/24 V supply voltage
- FSVA30 - FSV-B32 - Lithium-ion battery pack (requires R&S FSV-B1, FSV-B30 and FSV-B34)
- FSVA30 - FS-B33 - USB mass memory write protection
- FSVA30 - FSV-B34 - Lithium-ion battery charger
- FSVA30 - FSVA-B40 - 40 MHz analysis bandwidth
- FSVA30 - FSV-B160 - 160 MHz analysis bandwidth (for frequencies ≤ 7 GHz; with option FSVA-B11 also for f > 7 GHz; excludes FSV-B10 and FSV-B14)
- FSVA30 - FSV-K7 - Analog modulation analysis for AM, FM, φM
- FSVA30 - FSV-K8 - Bluetooth/EDR measurements
- FSVA30 - FSV-K9 - Power sensor measurement with R&S NRP power sensors
- FSVA30 - FSV-K10 - Analysis of GSM, EDGE and EDGE evolution signals
- FSVA30 - FSV-K14 - Spectrogram measurements
- FSVA30 - FSV-K30 - Noise figure and gain measurements
- FSVA30 - FSV-K40 - Phase noise measurement application
- FSVA30 - FSV-K54 - EMI measurement application
- FSVA30 - FSV-K54CAL - CISPR calibration for R&S FSV-K54 (ISO 17025)
- FSVA30 - FSV-K70 - Vector signal analysis
- FSVA30 - FSV-K72 - Analysis of 3GPP FDD base station signals incl. HSPA+
- FSVA30 - FSV-K73 - 3GPP FDD UE analysis incl. HSPA+
- FSVA30 - FSV-K76 - 3GPP TD-SCDMA BTS measurements
- FSVA30 - FSV-K77 - TD-SCDMA UE measurements
- FSVA30 - FSV-K82 - Analysis of CDMA2000 base station signals
- FSVA30 - FSV-K83 - CDMA2000 MS measurements
- FSVA30 - FSV-K84 - Analysis of 1xEV-DO base station signals
- FSVA30 - FSV-K85 - 1xEV-DO MS measurements
- FSVA30 - FSV-K91 - Analysis of WLAN 802.11a, b, g, j signals
- FSVA30 - FSV-K91N - Extension of R&S FSV-K91 to 802.11n (requires FSVA-B40 or FSV-B160)
- FSVA30 - FSV-K91P - WLAN 802.11p measurement application (requires FSVA-B40 or FSV-B160, and FSV-K91)
- FSVA30 - FSV-K100 - Analysis of EUTRA/LTE FDD downlink signals
- FSVA30 - FSV-K101 - Analysis of EUTRA/LTE FDD uplink signals
- FSVA30 - FSV-K102 - EUTRA/LTE downlink MIMO measurements (requires FSV-K100 or FSV-K104)
- FSVA30 - FSV-K103 - EUTRA/LTE uplink MIMO, PC software (requires FSV-K101 or FSV-K105)
- FSVA30 - FSV-K104 - Analysis of EUTRA/LTE TDD downlink signals
- FSVA30 - FSV-K105 - Analysis of EUTRA/LTE TDD uplink signals
- FSVA30 - FSV-K144 - 5G NR downlink analysis
- FSVA30 - FSV-U4 - Windows 10 upgrade for R&S FSV/FSVA with FMR11 CPU board
| Model | FSVA30 |
|---|
ROHDE & SCHWARZ FSVA30 Signal and Spectrum Analyzer
Its high dynamic range and low phase noise make the Rohde & Schwarz FSVA30 the perfect instrument for demanding spectral measurements such as ACLR measurements on narrowband signals and phase noise measurements. The optional YIG preselector bypass allows signal analysis with up to 160 MHz analysis bandwidth over the instrument's full frequency range. Featuring compact dimensions, low weight, direct support of power sensors and an optional battery pack, the analyzers are ideal for installation and service work.
In development applications, the Rohde & Schwarz FSVA30 excel's due to its RF properties, a 160 MHz signal analysis bandwidth and a wide range of analysis packages. These include measurement applications for noise figure and phase noise, EMI diagnostics, analog and vector signal modulation as well as wireless and wideband communications standards. Furthermore, analysis software for pulse measurements, OFDM vector signal analysis and distortion analysis of amplifiers is available. The Rohde & Schwarz FSVA30 are easy to operate via their touchscreen based user interface and clearly structured menus.
Specifications for the ROHDE & SCHWARZ FSVA30 Signal and Spectrum Analyzer Include:
| Frequency Range | 10 Hz to 30 GHz |
| Signal analysis bandwidth | 28 MHz (Up to 160 MHz optional) |
| standard sweep | 1 Hz to 10 MHz |
| FFT sweep | 1 Hz to 3 MHz |
