Sorensen
Sorensen DCS20-50E
20-50A DC Power Supply
0 – 20 V DC Ausgangsspannung
0 – 50 A Ausgangsstrom
1000 W Ausgangsleistung
105 – 132 V / 210 – 264 V AC, 47 – 63 Hz Eingangsspannung
≤ 0,01 % + 2 mV Spannungsregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 20 V DC |
| Ausgangsstrom | 0 – 50 A |
| Ausgangsleistung | 1000 W |
| Eingangsspannung | 105 – 132 V / 210 – 264 V AC, 47 – 63 Hz |
| Spannungsregelung (Lastregulierung) | ≤ 0,01 % + 2 mV |
| Stromregelung (Lastregulierung) | ≤ 0,01 % + 2 mA |
| Restwelligkeit und Rauschen (Spannung) | ≤ 1 mV RMS / 5 mV Spitze-Spitze |
| Betriebstemperaturbereich | 0 °C bis +50 °C |
| Schutzfunktionen | Überspannungsschutz (OVP), Überstromschutz, Kurzschlussschutz |
| Gehäuseformat | 19-Zoll-Rack, 2 HE (2U) |
Sorensen DCS20-50E Options:
- DCS20-50E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS20-50E - M9C - Internal IEEE-488/RS 232 Interface (May not be combined with M51A or M85)
- DCS20-50E - M13 - Locking shafts (front panel potentiometers)
- DCS20-50E - M32 - Master/slave paralleling cable configured for two or more units
- DCS20-50E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS20-50E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS20-50E |
|---|
20 VOLT / 50 Amp DC Power Supply
