Sorensen
Sorensen DCS60-18E
60-18A DC Power Supply
0 – 60 V DC Ausgangsspannung
0 – 18 A Ausgangsstrom
1080 W Ausgangsleistung
115/230 V AC, 50/60 Hz Eingangsspannung
≤ 0,01% + 2 mV Spannungsregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 60 V DC |
| Ausgangsstrom | 0 – 18 A |
| Ausgangsleistung | 1080 W |
| Eingangsspannung | 115/230 V AC, 50/60 Hz |
| Spannungsregelung (Lastregulierung) | ≤ 0,01% + 2 mV |
| Stromregelung (Lastregulierung) | ≤ 0,01% + 2 mA |
| Restwelligkeit und Rauschen (Spannung) | ≤ 1 mV RMS |
| Restwelligkeit und Rauschen (Strom) | ≤ 3 mA RMS |
| Schnittstellenoptionen | Analoge Programmierung, RS-232/RS-485 (optional GPIB) |
| Formfaktor / Einbaugröße | 2U Rack-montierbar (19-Zoll-Gehäuse) |
Sorensen DCS60-18E Options:
- DCS60-18E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS60-18E - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP (May not be combined with M51A or M85)
- DCS60-18E - M13 - Locking shafts (front panel potentiometers)
- DCS60-18E - M32 - Master/slave paralleling cable configured for two or more units
- DCS60-18E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS60-18E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS60-18E |
|---|
The Sorensen DCS60-18E 1 kW, Programmable Power Supply utilizes Switch-Mode technology to achieve High Power density in a low profile chassis. Utilizing unique packaging techniques, the DCS60-18E provides continuous Output Power in any volt/Amp combination
