Sorensen
Sorensen DCS60-55
60-55 DC Power Supply
0 – 60 V DC Ausgangsspannung
0 – 55 A Ausgangsstrom
3300 W Ausgangsleistung
105 – 132 V AC / 210 – 264 V AC, 47 – 63 Hz Eingangsspannung
≤ 0,01 % + 5 mV Spannungsregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 60 V DC |
| Ausgangsstrom | 0 – 55 A |
| Ausgangsleistung | 3300 W |
| Eingangsspannung | 105 – 132 V AC / 210 – 264 V AC, 47 – 63 Hz |
| Spannungsregelung (Lastregulierung) | ≤ 0,01 % + 5 mV |
| Stromregelung (Lastregulierung) | ≤ 0,01 % + 5 mA |
| Restwelligkeit und Rauschen (Spannung) | ≤ 15 mV Spitze-Spitze |
| Betriebstemperaturbereich | 0 °C – 50 °C |
| Schutzfunktionen | Überspannungsschutz (OVP), Überstromschutz (OCP) |
| Abmessungen (B × H × T) | 425 mm × 133 mm × 635 mm (3U, 19-Zoll-Rack) |
Sorensen DCS60-55 Options:
- DCS60-55 - M1 - Factory configured for 115 VAC input (1 and 1.2 kW units only)
- DCS60-55 - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP
- DCS60-55 - M13 - Locking shafts (front panel potentiometers)
- DCS60-55 - M32 - Master/slave paralleling cable configured for two or more units
- DCS60-55 - M33 - Replace input connector with terminal block (3 kW only)
- DCS60-55 - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor outputs up to 500V relative to the supply's return line
- DCS60-55 - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector (3 ft. connector included)
- DCS60-55 - 105-330-26 - Rack slide kit (3 kW only)
| Model | DCS60-55 |
|---|
