Sorensen
Sorensen DCS600-1.7B
600-1.7A DC Power Supply
0 – 600 V DC Ausgangsspannung
0 – 1,7 A Ausgangsstrom
1020 W Ausgangsleistung
0,02 % + 2 mV Spannungsregelung (Lastregulierung)
0,05 % + 1 mA Stromregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 600 V DC |
| Ausgangsstrom | 0 – 1,7 A |
| Ausgangsleistung | 1020 W |
| Spannungsregelung (Lastregulierung) | 0,02 % + 2 mV |
| Stromregelung (Lastregulierung) | 0,05 % + 1 mA |
| Restwelligkeit und Rauschen (Spannung) | 75 mV Spitze-Spitze |
| Eingangsspannung | 208 V AC / 240 V AC, einphasig, 50/60 Hz |
| Bedienelemente | Analoge Fernsteuerung, Programmierbare Spannung und Strom |
| Schutzfunktionen | Überspannungsschutz (OVP), Überstromschutz (OCP) |
| Abmessungen (B × H × T) | 425 mm × 133 mm × 597 mm (19 Zoll, 3 HE) |
Sorensen DCS600-1.7B Options:
- DCS600-1.7B - M1 - Factory configured for 115 VAC input (1 and 1.2 kW units only)
- DCS600-1.7B - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP
- DCS600-1.7B - M13 - Locking shafts (front panel potentiometers)
- DCS600-1.7B - M32 - Master/slave paralleling cable configured for two or more units
- DCS600-1.7B - M33 - Replace input connector with terminal block (3 kW only)
- DCS600-1.7B - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor outputs up to 500V relative to the supply's return line
- DCS600-1.7B - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector (3 ft. connector included)
| Model | DCS600-1.7B |
|---|
