Sorensen
Sorensen DCS600-1.7E
600-1.7A DC Power Supply
0 – 600 V DC Ausgangsspannung
0 – 1,7 A Ausgangsstrom
1020 W Ausgangsleistung
0,02 % + 20 mV Spannungsregelung (Lastregulierung)
0,05 % + 3 mA Stromregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 600 V DC |
| Ausgangsstrom | 0 – 1,7 A |
| Ausgangsleistung | 1020 W |
| Spannungsregelung (Lastregulierung) | 0,02 % + 20 mV |
| Stromregelung (Lastregulierung) | 0,05 % + 3 mA |
| Restwelligkeit und Rauschen (Spannung) | 75 mV Spitze-Spitze |
| Eingangsspannung | 105 – 132 V AC / 210 – 264 V AC, 47 – 63 Hz |
| Betriebstemperaturbereich | 0 °C bis +50 °C |
| Abmessungen (B x H x T) | 425 mm x 133 mm x 635 mm (3U 19-Zoll-Rack) |
| Gewicht | ca. 27 kg |
Sorensen DCS600-1.7E Options:
- DCS600-1.7E - M1 - Factory configured for 115 VAC input (1 kW and 1.2 kW units only)
- DCS600-1.7E - M9C - Internal IEEE-488/RS 232 Interface Card with voltage and current readback and adjustable OVP (May not be combined with M51A or M85)
- DCS600-1.7E - M13 - Locking shafts (front panel potentiometers)
- DCS600-1.7E - M32 - Master/slave paralleling cable configured for two or more units
- DCS600-1.7E - M51A - Isolated analog programming control of V/I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply's return line (May not be combined with M9C or M85)
- DCS600-1.7E - M85 - Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector, 3 ft. connector included (May not be combined with M9C or M51A)
| Model | DCS600-1.7E |
|---|
