Sorensen
Sorensen DHP 10
0-50 100.0V Power Supply
0 – 10 V DC Ausgangsspannung
0 – 100 A Ausgangsstrom
1000 W Ausgangsleistung
115/230 V AC, 50/60 Hz Eingangsversorgung
0,01 % + 2 mV Spannungsregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 10 V DC |
| Ausgangsstrom | 0 – 100 A |
| Ausgangsleistung | 1000 W |
| Eingangsversorgung | 115/230 V AC, 50/60 Hz |
| Spannungsregelung (Lastregulierung) | 0,01 % + 2 mV |
| Stromregelung (Lastregulierung) | 0,01 % + 2 mA |
| Restwelligkeit und Rauschen (Spannung) | 1 mV RMS (typisch) |
| Restwelligkeit und Rauschen (Strom) | 3 mA RMS (typisch) |
| Schutzfunktionen | Überspannungsschutz (OVP), Übertemperaturschutz |
| Gehäuseformat | 19-Zoll-Rackeinbau, 1U |
Sorensen DHP 10 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
