Sorensen
Sorensen DHP 15-200 15.0V Power Supply
5-200 15.0V Power Supply
15,0 V Ausgangsspannung
200 A Ausgangsstrom
3000 W Ausgangsleistung
0,05 % + 5 mV Spannungsregelung (Lastregulierung)
0,1 % + 50 mA Stromregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 15,0 V |
| Ausgangsstrom | 200 A |
| Ausgangsleistung | 3000 W |
| Spannungsregelung (Lastregulierung) | 0,05 % + 5 mV |
| Stromregelung (Lastregulierung) | 0,1 % + 50 mA |
| Restwelligkeit und Rauschen (Spannung) | 10 mV Spitze-Spitze |
| Eingangsspannung | 208/240 V AC, einphasig |
| Betriebstemperaturbereich | 0 °C bis 50 °C |
| Abmessungen (B x H x T) | 425 mm x 132 mm x 635 mm |
| Gewicht | 29,5 kg |
Sorensen DHP 15-200 15.0V Power Supply Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
