Sorensen
Sorensen DHP 8
0-62 80.0V Power Supply
0 – 8 V DC Ausgangsspannung
0 – 600 A Ausgangsstrom
5000 W Ausgangsleistung
≤ 0,05% + 5 mV Spannungsregelung (Lastregulierung)
≤ 0,05% + 50 mA Stromregelung (Lastregulierung)
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 8 V DC |
| Ausgangsstrom | 0 – 600 A |
| Ausgangsleistung | 5000 W |
| Spannungsregelung (Lastregulierung) | ≤ 0,05% + 5 mV |
| Stromregelung (Lastregulierung) | ≤ 0,05% + 50 mA |
| Restwelligkeit und Rauschen (Spannung) | ≤ 50 mV Spitze-Spitze |
| Eingangsspannung | 208 V AC, 3-phasig |
| Betriebstemperaturbereich | 0 °C bis +50 °C |
| Schutzfunktionen | Überspannungsschutz, Überstromschutz, Überhitzungsschutz |
| Schnittstellen / Fernsteuerung | Analoge Fernsteuerung, RS-232 (optional IEEE-488) |
Sorensen DHP 8 Options:
- DHP - M1 - 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M2 - 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
- DHP - M8 - Internal RS-232 remote serial interface
- DHP - M9D - Internal IEEE-488.2 interface
- DHP - M10 - Both IEEE-488.2 and RS-232
- DHP - M11 - RS-232 and isolated analog programming
- DHP - M12 - IEEE-488.2 and isolated analog programming
- DHP - M14 - IEEE-488.2, RS-232 and isolated analog programming
- DHP - M51 - Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
| Model | DHP |
|---|
