Sorensen
Sorensen DHP80-375
80-375 DC Power Supply
0 – 80 V DC Ausgangsspannung
0 – 375 A Ausgangsstrom
30.000 W (30 kW) Ausgangsleistung
208/240 V AC, dreiphasig Eingangsspannung
47 – 63 Hz Eingangsfrequenz
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 80 V DC |
| Ausgangsstrom | 0 – 375 A |
| Ausgangsleistung | 30.000 W (30 kW) |
| Eingangsspannung | 208/240 V AC, dreiphasig |
| Eingangsfrequenz | 47 – 63 Hz |
| Leitungsregelung (Spannung) | ≤ 0,01 % + 2 mV |
| Lastregulierung (Strom) | ≤ 0,01 % + 5 mA |
| Welligkeit und Rauschen (Spannung) | ≤ 75 mV RMS |
| Betriebstemperaturbereich | 0 °C – 50 °C |
| Schutzfunktionen | Überspannungsschutz, Überstromschutz, Überhitzungsschutz |
Sorensen DHP80-375 Options:
- DHP80-375 - Option - Three, 3-wire plus ground (3-phase input power)
- DHP80-375 - Option - 400 VAC input (tested to 360-440 VAC)
- DHP80-375 - Option - 480 VAC input (tested to 432-528 VAC)
| Model | DHP80-375 |
|---|
Output: 0-80Vdc 0-375 Amp
Ripple: 15mV (typical)
Regulation (Line or Load)
Voltage: 0.1% of maximum rated output
Current: 0.5% of maximum rated output
Transient Response: 2 ms to steady state output voltage (within 2% of Vmax) for 30% step load change (slower response in paralleled systems)
Stability: ?0.05% maximum rating per 8 hours after a 30 minute warm-up time at fixed line, load and temperature
Efficiency: 80% minimum at full load
Temperature Coefficient: 0.02%/?C of rated output voltage; 0.03%/?C of rated output current
Input:
190-253 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye input may be used (Wye does not require the neutral connection)
Operating Temperature: 0?C to +50?C, no derating
Storage Temperature: -20?C to 70?C
Cooling: Internal fan
