Sorensen
Sorensen DLM 2
0-30 20.0V Power Supply
0 – 60 V DC Ausgangsspannung
0 – 33,3 A Ausgangsstrom
2000 W Ausgangsleistung
1 Anzahl der Ausgänge
RS-232, GPIB (optional), Analoge Programmierung Programmierschnittstelle
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 60 V DC |
| Ausgangsstrom | 0 – 33,3 A |
| Ausgangsleistung | 2000 W |
| Anzahl der Ausgänge | 1 |
| Programmierschnittstelle | RS-232, GPIB (optional), Analoge Programmierung |
| Spannungsregelung (Last) | 0,02 % + 2 mV |
| Stromregelung (Last) | 0,05 % + 5 mA |
| Restwelligkeit und Rauschen (Spannung) | 1 mV RMS / 5 mV Spitze-Spitze |
| Betriebstemperaturbereich | 0 °C – 50 °C |
| Eingangsversorgungsspannung | 115 V AC / 230 V AC, 50/60 Hz |
Sorensen DLM 2 Options:
- DLM - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server: Direct control of power supply via standard web browser, RS-232C Interface
- DLM - M6 - Disconnect & Polarity reversal relays (10V to 300V models only). Requires one of the following options: M9G, M85, M130 or M131. Output disconnect and polarity reversal relays controlled via SCPI commands. An SPST relay is in line with each output lead.
- DLM - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM - M13 - Locking shafts (front panel potentiometers)
- DLM - M51A - Optically Isolated Analog Programming and Monitoring
- DLM - M85 - Multichannel Slave Interface
- DLM - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM |
|---|
