Sorensen DLM 8-75
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 8 V |
| Ausgangsstrom | 0 – 75 A |
| Ausgangsleistung | 200 W |
| Eingangsspannung | 100 – 240 V AC, 50/60 Hz |
| Spannungsregelung (Lastregulierung) | ≤ 0,05% + 5 mV |
| Stromregelung (Lastregulierung) | ≤ 0,05% + 15 mA |
| Restwelligkeit und Rauschen (Spannung) | ≤ 1 mV RMS |
| Restwelligkeit und Rauschen (Strom) | ≤ 15 mA RMS |
| Schutzfunktionen | Überspannungsschutz (OVP), Übertemperaturschutz (OTP) |
| Schnittstelle / Fernsteuerung | Analoge Fernsteuerung, RS-232 (optional GPIB/USB) |
Sorensen DLM 8-75 Options:
- DLM 8-75 - M130 - Ethernet/LAN Option (16 bit): LXI Class C Compliant, 10/100 base-T, TCP/IP Protocol, ICMP (Ping Server), Web Server, RS-232C Interface
- DLM 8-75 - M6 - Disconnect & Polarity reversal relays (requires M9G, M85, M130 or M131); output disconnect and polarity reversal relays controlled via SCPI commands, SPST relay in line with each output lead
- DLM 8-75 - M9G - IEEE-488.2 and RS-232C Interfaces
- DLM 8-75 - M13 - Locking shafts (front panel potentiometers)
- DLM 8-75 - M51A - Optically Isolated Analog Programming and Monitoring
- DLM 8-75 - M85 - Multichannel Slave Interface
- DLM 8-75 - M131 - Multichannel Slave Interface (16 bit) (M130 Master ONLY)
- DLM 8-75 - DLMP1 - Paralleling Cable; one cable per slave unit
- DLM 8-75 - DLMRK - Rackmount Kit for single DLM with filler panel and for two units mounted side-by-side
| Model | DLM 8-75 |
|---|
SORENSEN DLM 8-75 DC Power Supply
The Sorensen DLM 8-75 DC Programmable Power Supply is designed to provide continuously variable output voltage and cur for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis. The DLM8-75 DC Power Supply is equipped with Zero Voltage Switching (ZVS) technology, these supplies are able to achieve exceptionally low ripple and noise rivaling larger and more expensive linear power supplies.
The Sorensen DLM 8-75 DC Programmable Power Supply includes a front panel with an easy to use layout. Voltage and cur can be set from individual 10-turn potentiometer knobs. Control push buttons include power on, output on, local/remote, voltage/cur preview and overvoltage protection preview. Set-point or actual voltage/ cur values can be viewed on two 3 ½digit LED displays.
Specifications for the SORENSEN DLM 8-75 DC Power Supply Include:
| Voltage | 8 V |
| Current | 75 A |
| Power | 600 W |
