Sorensen
Sorensen SGI200-100
DC Power Supply, 200V, 100A, 20kW
0 – 200 V DC Ausgangsspannung
0 – 100 A Ausgangsstrom
5000 W (5 kW) Ausgangsleistung
208 V AC / 400 V AC, dreiphasig Eingangsspannung
47 – 63 Hz Eingangsfrequenz
| Attribut | Wert |
|---|---|
| Ausgangsspannung | 0 – 200 V DC |
| Ausgangsstrom | 0 – 100 A |
| Ausgangsleistung | 5000 W (5 kW) |
| Eingangsspannung | 208 V AC / 400 V AC, dreiphasig |
| Eingangsfrequenz | 47 – 63 Hz |
| Spannungsregelung | ± 0,1 % der Nennausgangsspannung |
| Stromregelung | ± 0,2 % des Nennausgangsstroms |
| Schnittstellenoptionen | Analoge Programmierung, RS-232, GPIB (optional) |
| Schutzfunktionen | Überspannungsschutz, Überstromschutz, Überhitzungsschutz |
| Betriebstemperatur | 0 °C – 50 °C |
Sorensen SGI200-100 Options:
- SGI200-100 - A - Control Option: Analog
- SGI200-100 - I - Control Option: Intelligent
- SGI200-100 - C - Input Voltage 187 / 242VAC, 3 Phase
- SGI200-100 - D - Input Voltage 342 / 440VAC, 3 Phase
- SGI200-100 - E - Input Voltage 396 / 528VAC, 3 Phase
- SGI200-100 - 0A - Remote Control: No Option
- SGI200-100 - 1A - Remote Control: IEEE-488.2 + RS-232C
- SGI200-100 - 1C - Remote Control: Ethernet + RS-232C
- SGI200-100 - 1D - Remote Control: Isolated Analog Control
- SGI200-100 - 1E - Remote Control: Shaft Locks (SGA series only)
- SGI200-100 - 2A - Remote Control: Combined Options 1A+1D
- SGI200-100 - 2C - Remote Control: Combined Options 1A+1E (SGA Only)
- SGI200-100 - 2G - Remote Control: Combined Options 1C+1D
- SGI200-100 - 2H - Remote Control: Combined Options 1C+1E (SGA Only)
- SGI200-100 - 2J - Remote Control: Combined Options 1D+1E (SGA Only)
- SGI200-100 - 3C - Remote Control: Combined Options 1A+1D+1E (SGA Only)
- SGI200-100 - 3G - Remote Control: Combined Options 1C+1D+1E (SGA Only)
- SGI200-100 - AA - Process Option: No option
- SGI200-100 - AB - Process Option: Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
- SGI200-100 - AJ - Modification: Front panel dust filter - factory installed - 3U unit only
- SGI200-100 - CV - Modification: 400Hz AC input @ 208 VAC (does not carry CE, CSA or UL marks) (6U only) STD on 3U
- SGI200-100 - PF - Modification: Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V. Included in 10V-30V, 50V and 1000V.)
- SGI200-100 - R - RoHS Compliant Version
| Model | SGI200-100 |
|---|
SORENSEN SGI200-100 DC Power Supply The Sorensen SGI200-100 represents the next generation of high power programmable DC power supplies. It is designed for exceptional load transient response, low noise and the highest power density in the industry. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units. The SGI combines onboard intelligent controls with the outstanding power electronics common to all SG family supplies. These controls enable sophisticated sequencing, constant power mode and save/recall of instrument settings.At the heart of the Sorensen SGI200-100 is a 5 kW power module. Four modules are configured in a single chassis to deliver 20kW of power. Combinations of these chassis can then be easily paralleled to achieve power levels up to 150 kW. Paralleled units operate like one single supply providing total system cur. Looping of sequences makes the SGI200-100 ideal for repetitive testing. An impressive vacuum fluorescent graphical display in eight languages, context sensitive “soft” keys and front panel keyboard simplify programming. Specifications of the SORENSEN SGI200-100 DC Power Supply includes: See Datasheet for Full Specifications
