Tektronix
Tektronix MSO70604C
Mixed Signal Oscilloscope, 6 GHz 4 + 16 Ch., 25 GS/s
6 GHz Bandbreite
4 analoge Kanäle + 16 digitale Kanäle Anzahl der Kanäle
25 GS/s (bei einem Kanal), 12,5 GS/s (bei zwei Kanälen) Abtastrate
bis zu 250 Mio. Punkte Aufzeichnungslänge
8 Bit (bis zu 11 Bit mit Hi-Res-Modus) Vertikale Auflösung
| Attribut | Wert |
|---|---|
| Bandbreite | 6 GHz |
| Anzahl der Kanäle | 4 analoge Kanäle + 16 digitale Kanäle |
| Abtastrate | 25 GS/s (bei einem Kanal), 12,5 GS/s (bei zwei Kanälen) |
| Aufzeichnungslänge | bis zu 250 Mio. Punkte |
| Vertikale Auflösung | 8 Bit (bis zu 11 Bit mit Hi-Res-Modus) |
| Anstiegszeit | 58,3 ps (berechnet) |
| Zeitbasisgenauigkeit | ±1 ppm |
| Eingangsimpedanz | 50 Ω oder 1 MΩ |
| Display | 32,4 cm (12,7 Zoll) XGA-Farb-TFT-LCD |
| Betriebssystem | Windows 7 (64-Bit) |
Tektronix MSO70604C Options:
- MSO70604C - Opt. 5XL - Record Length: 62.5 MS/Ch (Standard on MSO models)
- MSO70604C - Opt. 10XL - Record Length: 125 MS/Ch
- MSO70604C - Opt. 20XL - Record Length: 250 MS/Ch (For models of bandwidth ≥12.5 GHz only)
- MSO70604C - Opt. 50XL - Record Length: 500 MS/Ch on 4 channels, 1 G/Ch on 2 channels (DX models only)
- MSO70604C - Opt. SSD - Additional Removable Disk – Solid State Drive (C models only)
- MSO70604C - Opt. LT - Waveform Limit Testing
- MSO70604C - Opt. MTH - Mask Testing for Serial Standards. Includes hardware clock recovery for up to 3.125 Gb/s (standard on MSO models)
- MSO70604C - Opt. ST6G - Protocol Triggering and Decoding for 8b/10b-encoded Serial Signals (Up to 6.25 Gb/s). Includes hardware clock recovery and pattern lock triggering (standard on MSO models)
- MSO70604C - Opt. D-PHY - MIPI® D-PHY Essentials – Characterization and Analysis Solution (Requires Opt. DJA)
- MSO70604C - Opt. DDRA - DDR Memory Bus Analysis (Requires Opt. DJA)
- MSO70604C - Opt. DJA - DPOJET Advanced Jitter and Eye Diagram Analysis (standard on MSO models)
- MSO70604C - Opt. DP12 - DisplayPort 1.2 Source Test Automation Software (Requires Opt. DJA) (Requires Opt. 5XL or higher)
- MSO70604C - Opt. DSA - Digital Serial Analysis Bundle (includes 5XL, DJA, MTH, ST6G)
- MSO70604C - Opt. ERRDT - Frame and Bit Error Rate Detector for High-speed Serial Standards (Requires Opt. ST6G)
- MSO70604C - Opt. ET3 - Ethernet Compliance Test Software (Requires Ethernet Test Fixture)
- MSO70604C - Opt. FC-16G - Fiber Channel - 16G DPOJET Essentials
- MSO70604C - Opt. HSIC - HSIC Essentials - Electrical Validation and Protocol Decode Solution (Requires Opt. DJA)
- MSO70604C - Opt. HT3 - HDMI Compliance Test Software
- MSO70604C - Opt. HT3DS - HDMI Direct Synthesis for HDMI 1.4
- MSO70604C - Opt. MHD - MHL Advanced Analysis and Compliance Software (Requires Opt. DJA and Opt 2XL or higher)
- MSO70604C - Opt. MOST - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 (Requires Opt. DJA)
- MSO70604C - Opt. M-PHY - MIPI® M-PHY Essentials – Characterization and Analysis Solution (Requires Opt. DJA)
- MSO70604C - Opt. M-PHYTX - M-PHY Automated Transmitter Solution (Requires Opt. DJA)
- MSO70604C - Opt. M-PHYRX - M-PHY Automated Receiver Solution (Requires Opt. ST6G) (Requires Opt. ERRDT)
- MSO70604C - Opt. PCE3 - PCI Express® Transmitter Compliance and Debug (Requires Opt. DJA) (For models of bandwidth ≥6 GHz only)
- MSO70604C - Opt. PWR - Advanced Power Measurement and Analysis Software
- MSO70604C - Opt. SFP-TX - SFP+ Compliance and Debug Solution (Requires Opt. DJA)
- MSO70604C - Opt. SFP-WDP - SFP+ Compliance and Debug Solution – WDP Measurement (Requires Opt. DJA)
- MSO70604C - Opt. SDLA64 - Serial Data Link Analysis Visualizer
- MSO70604C - Opt. SR-AERO - Aerospace Serial Triggering and Analysis (MIL-STD-1553B)
- MSO70604C - Opt. SR-AUTO - Automotive Serial Triggering and Analysis (CAN/LIN/FlexRay)
- MSO70604C - Opt. SR-COMP - Computer Serial Triggering and Analysis (RS-232/422/485/UART)
- MSO70604C - Opt. SR-CUST - Custom Serial Analysis (standard on all models)
- MSO70604C - Opt. SR-DPHY - MIPI® D-PHY (DSI / CSI2) Serial Analysis
- MSO70604C - Opt. SR-EMBD - Embedded Serial Triggering and Analysis (I2C, SPI) (standard on MSO models)
- MSO70604C - Opt. SR-ENET - Ethernet Serial Analysis (10BASE-T and 100BASE-TX)
- MSO70604C - Opt. SR-PCIE - PCI Express Serial Analysis (Opt. ST6G required for triggering)
- MSO70604C - Opt. SR-USB - USB Serial Triggering and Analysis
- MSO70604C - Opt. SVA - AM/FM/PM Audio Signal Analysis (Requires Opt. SVE)
- MSO70604C - Opt. SVE - SignalVu® Essentials – Vector Signal Analysis Software
- MSO70604C - Opt. SVM - General Purpose Modulation Analysis (Requires Opt. SVE)
- MSO70604C - Opt. SVO - Flexible OFDM Analysis (Requires Opt. SVE)
- MSO70604C - Opt. SVP - Advanced Signal Analysis (including pulse measurements) (Requires Opt. SVE)
- MSO70604C - Opt. SVT - Frequency and Phase Settling Time Measurements (Requires Opt. SVE)
- MSO70604C - Opt. SV23 - WLAN 802.11a/b/g/j/p measurement application (requires Opt. SVE)
- MSO70604C - Opt. SV24 - WLAN 802.11n measurement application (requires Opt. SV23)
- MSO70604C - Opt. SV25 - WLAN 802.11ac measurement application (requires Opt. SV24) (For models of bandwidth ≥6 GHz only)
- MSO70604C - Opt. SV26 - APCO P25 compliance testing and analysis application (requires Opt. SVE)
- MSO70604C - Opt. UHS2 - UHS-II-Host-Tx and UHS-ii-Device-Tx Measurements (For models of bandwidth ≥6 GHz only)
- MSO70604C - Opt. USBHSIC - USB2.0 and HSIC Bundle, includes options Opt. DJA, HSIC, SR-USB, and USB
- MSO70604C - Opt. VET - Visual Trigger
- MSO70604C - Opt. C3 - Calibration Service 3 Years
- MSO70604C - Opt. C5 - Calibration Service 5 Years
- MSO70604C - Opt. D1 - Calibration Data Report
- MSO70604C - Opt. D3 - Calibration Data Report 3 Years (with Opt. C3)
- MSO70604C - Opt. D5 - Calibration Data Report 5 Years (with Opt. C5)
- MSO70604C - Opt. G3 - Complete Care 3 Years (includes loaner, scheduled calibration, and more)
- MSO70604C - Opt. G5 - Complete Care 5 Years (includes loaner, scheduled calibration, and more)
- MSO70604C - Opt. R3 - Repair Service 3 Years (including warranty)
- MSO70604C - Opt. R5 - Repair Service 5 Years (including warranty)
- MSO70604C - Opt. L0 - English manual
- MSO70604C - Opt. L1 - French manual
- MSO70604C - Opt. L3 - German manual
- MSO70604C - Opt. L5 - Japanese manual
- MSO70604C - Opt. L7 - Simplified Chinese manual
- MSO70604C - Opt. L8 - Traditional Chinese manual
- MSO70604C - Opt. L9 - Korean manual
- MSO70604C - Opt. L10 - Russian manual
- MSO70604C - Opt. L99 - No manual
- MSO70604C - Opt. A0 - North America power plug (115 V, 60 Hz)
- MSO70604C - Opt. A1 - Universal Euro power plug (220 V, 50 Hz)
- MSO70604C - Opt. A2 - United Kingdom power plug (240 V, 50 Hz)
- MSO70604C - Opt. A3 - Australia power plug (240 V, 50 Hz)
- MSO70604C - Opt. A5 - Switzerland power plug (220 V, 50 Hz)
- MSO70604C - Opt. A6 - Japan power plug (100 V, 50/60 Hz)
- MSO70604C - Opt. A10 - China power plug (50 Hz)
- MSO70604C - Opt. A11 - India power plug (50 Hz)
- MSO70604C - Opt. A12 - Brazil power plug (60 Hz)
- MSO70604C - Opt. A99 - No power cord
| Model | MSO70604C |
|---|
Das Tektronix MSO70604C ist ein Mixed-Signal-Oszilloskop mit 6 GHz Bandbreite, 25 GS/s Abtastrate und 4 analogen + 16 digitalen Kanälen. Anstiegszeit bis 45 ps, hohe Signalqualität und 500 M Speicher mit MultiView Zoom™. Schnelle Erfassung (>300.000 wfms/s) und fortschrittliches serielles Triggern.
Unterstützt PCIe, I2C, SPI, CAN, LIN, USB, MIPI® und weitere Protokolle mit automatischer Analyse. iCapture®, präzises Triggern, Suche und Markierung integriert.
Testwall kann das gebrauchte Tektronix MSO70604C vollständig getestet liefern. Mit Expertenunterstützung und weltweitem Versand bietet Testwall zuverlässige Messtechnik und höchste Servicequalität. Kontaktieren Sie uns für Kalibrierung oder Reparatur des Tektronix MSO70604C.
