Tektronix
Tektronix MSO72504DX
4+16-CH, DIGITAL, 25GHz Mixed Signal Oscilloscope
25 GHz Bandbreite
4 analoge Kanäle Anzahl der Kanäle
100 GS/s (auf einem Kanal), 50 GS/s (auf zwei Kanälen) Abtastrate
8 Bit (bis zu 11 Bit im High-Resolution-Modus) Vertikale Auflösung
bis zu 250 Mio. Punkte Aufzeichnungslänge
| Attribut | Wert |
|---|---|
| Bandbreite | 25 GHz |
| Anzahl der Kanäle | 4 analoge Kanäle |
| Abtastrate | 100 GS/s (auf einem Kanal), 50 GS/s (auf zwei Kanälen) |
| Vertikale Auflösung | 8 Bit (bis zu 11 Bit im High-Resolution-Modus) |
| Aufzeichnungslänge | bis zu 250 Mio. Punkte |
| Digitale Kanäle | 16 digitale Kanäle (über optionale Logik-Sonde) |
| Zeitbasisgenauigkeit | ±1 ppm |
| Eingangsimpedanz | 50 Ω / 1 MΩ |
| Display | 32,4 cm (12,1 Zoll) TFT-Farb-LCD-Touchscreen |
| Betriebssystem | Windows 7 (64-Bit) |
Tektronix MSO72504DX Options:
- MSO72504DX - Opt. 5XL - 62.5 MS/Ch (Standard on MSO models)
- MSO72504DX - Opt. 10XL - 125 MS/Ch
- MSO72504DX - Opt. 20XL - 250 MS/Ch (For models of bandwidth ≥12.5 GHz only)
- MSO72504DX - Opt. 50XL - 500 MS/Ch on 4 channels, 1 G/Ch on 2 channels (DX models only)
- MSO72504DX - Opt. SSD - Additional Removable Disk – Solid State Drive (Standard on DX models)
- MSO72504DX - Opt. LT - Waveform Limit Testing
- MSO72504DX - Opt. MTH - Mask Testing for Serial Standards. Includes hardware clock recovery for up to 3.125 Gb/s (standard on MSO models)
- MSO72504DX - Opt. ST6G - Protocol Triggering and Decoding for 8b/10b-encoded Serial Signals (Up to 6.25 Gb/s). Includes hardware clock recovery and pattern lock triggering (standard on MSO models)
- MSO72504DX - Opt. D-PHY - MIPI® D-PHY Essentials – Characterization and Analysis Solution (Requires Opt. DJA)
- MSO72504DX - Opt. DDRA - DDR Memory Bus Analysis (Requires Opt. DJA)
- MSO72504DX - Opt. DJA - DPOJET Advanced Jitter and Eye Diagram Analysis (standard on MSO models)
- MSO72504DX - Opt. DP12 - DisplayPort 1.2 Source Test Automation Software (Requires Opt. DJA) (Requires Opt. 5XL or higher)
- MSO72504DX - Opt. DSA - Digital Serial Analysis Bundle (includes 5XL, DJA, MTH, ST6G)
- MSO72504DX - Opt. ERRDT - Frame and Bit Error Rate Detector for High-speed Serial Standards (Requires Opt. ST6G)
- MSO72504DX - Opt. ET3 - Ethernet Compliance Test Software (Requires Ethernet Test Fixture)
- MSO72504DX - Opt. FC-16G - Fiber Channel - 16G DPOJET Essentials
- MSO72504DX - Opt. HSIC - HSIC Essentials - Electrical Validation and Protocol Decode Solution (Requires Opt. DJA)
- MSO72504DX - Opt. HT3 - HDMI Compliance Test Software
- MSO72504DX - Opt. HT3DS - HDMI Direct Synthesis for HDMI 1.4
- MSO72504DX - Opt. MHD - MHL Advanced Analysis and Compliance Software (Requires Opt. DJA and Opt 2XL or higher)
- MSO72504DX - Opt. MOST - Electrical Compliance and Debug Test Solution for MOST50 and MOST150 (Requires Opt. DJA)
- MSO72504DX - Opt. M-PHY - MIPI® M-PHY Essentials – Characterization and Analysis Solution (Requires Opt. DJA)
- MSO72504DX - Opt. M-PHYTX - M-PHY Automated Transmitter Solution (Requires Opt. DJA)
- MSO72504DX - Opt. M-PHYRX - M-PHY Automated Receiver Solution (Requires Opt. ST6G) (Requires Opt. ERRDT)
- MSO72504DX - Opt. PCE3 - PCI Express® Transmitter Compliance and Debug (Requires Opt. DJA) (For models of bandwidth ≥6 GHz only)
- MSO72504DX - Opt. PWR - Power Measurement and Analysis Software
- MSO72504DX - Opt. SAS3 - SAS3 12 GB/s Essentials (Requires Opt. DJA and 2XL or higher) (For models of bandwidth ≥20 GHz only)
- MSO72504DX - Opt. SFP-TX - SFP+ Compliance and Debug Solution (Requires Opt. DJA)
- MSO72504DX - Opt. SFP-WDP - SFP+ Compliance and Debug Solution – WDP Measurement (Requires Opt. DJA)
- MSO72504DX - Opt. SDLA64 - Serial Data Link Analysis Visualizer
- MSO72504DX - Opt. SR-AERO - Aerospace Serial Triggering and Analysis (MIL-STD-1553B)
- MSO72504DX - Opt. SR-AUTO - Automotive Serial Triggering and Analysis (CAN/LIN/FlexRay)
- MSO72504DX - Opt. SR-COMP - Computer Serial Triggering and Analysis (RS-232/422/485/UART)
- MSO72504DX - Opt. SR-CUST - Custom Serial Analysis (standard on all models)
- MSO72504DX - Opt. SR-DPHY - MIPI® D-PHY (DSI / CSI2) Serial Analysis
- MSO72504DX - Opt. SR-EMBD - Embedded Serial Triggering and Analysis (I2C, SPI) (standard on MSO models)
- MSO72504DX - Opt. SR-ENET - Ethernet Serial Analysis (10BASE-T and 100BASE-TX)
- MSO72504DX - Opt. SR-PCIE - PCI Express Serial Analysis
- MSO72504DX - Opt. SR-USB - USB Serial Triggering and Analysis
- MSO72504DX - Opt. SVA - AM/FM/PM Audio Signal Analysis (Requires Opt. SVE)
- MSO72504DX - Opt. SVE - SignalVu® Essentials – Vector Signal Analysis Software
- MSO72504DX - Opt. SVM - General Purpose Modulation Analysis (Requires Opt. SVE)
- MSO72504DX - Opt. SVO - Flexible OFDM Analysis (Requires Opt. SVE)
- MSO72504DX - Opt. SVP - Advanced Signal Analysis (including pulse measurements) (Requires Opt. SVE)
- MSO72504DX - Opt. SVT - Frequency and Phase Settling Time Measurements (Requires Opt. SVE)
- MSO72504DX - Opt. TBT-TX - Thunderbolt Transmitter Characterization, Debug, and Compliance Testing (Requires Opt. DJA and Opt. 2XL or higher) (For models of bandwidth ≥16 GHz only)
- MSO72504DX - Opt. UHS2 - UHS-II-Host-Tx and UHS-ii-Device-Tx Measurements (For models of bandwidth ≥6 GHz only)
- MSO72504DX - Opt. USB - USB 2.0 Compliance Test Software (Requires TDSUSBF USB Test Fixture)
- MSO72504DX - Opt. USBHSIC - USB2.0 and HSIC Bundle, includes options Opt. DJA, HSIC, SR-USB, and USB
- MSO72504DX - Opt. USB3 - USB 3.0 Compliance and Analysis Software (Requires Opt. DJA) (For models of bandwidth ≥8 GHz only)
- MSO72504DX - Opt. VET - Visual Trigger
- MSO72504DX - Opt. 10G-KR - 10GBASE-KR/KR4 Compliance and Debug Solution (Requires Opt. DJA) (For models of bandwidth ≥16 GHz only)
- MSO72504DX - Opt. C3 - Calibration Service 3 Years
- MSO72504DX - Opt. C5 - Calibration Service 5 Years
- MSO72504DX - Opt. D1 - Calibration Data Report
- MSO72504DX - Opt. D3 - Calibration Data Report 3 Years (with Opt. C3)
- MSO72504DX - Opt. D5 - Calibration Data Report 5 Years (with Opt. C5)
- MSO72504DX - Opt. G3 - Complete Care 3 Years (includes loaner, scheduled calibration, and more)
- MSO72504DX - Opt. G5 - Complete Care 5 Years (includes loaner, scheduled calibration, and more)
- MSO72504DX - Opt. R3 - Repair Service 3 Years (including warranty)
- MSO72504DX - Opt. R5 - Repair Service 5 Years (including warranty)
- MSO72504DX - Opt. L0 - English manual
- MSO72504DX - Opt. L1 - French manual
- MSO72504DX - Opt. L3 - German manual
- MSO72504DX - Opt. L5 - Japanese manual
- MSO72504DX - Opt. L7 - Simplified Chinese manual
- MSO72504DX - Opt. L8 - Traditional Chinese manual
- MSO72504DX - Opt. L9 - Korean manual
- MSO72504DX - Opt. L10 - Russian manual
- MSO72504DX - Opt. L99 - No manual
- MSO72504DX - Opt. A0 - North America power plug (115 V, 60 Hz)
- MSO72504DX - Opt. A1 - Universal Euro power plug (220 V, 50 Hz)
- MSO72504DX - Opt. A2 - United Kingdom power plug (240 V, 50 Hz)
- MSO72504DX - Opt. A3 - Australia power plug (240 V, 50 Hz)
- MSO72504DX - Opt. A5 - Switzerland power plug (220 V, 50 Hz)
- MSO72504DX - Opt. A6 - Japan power plug (100 V, 110/120 V, 60 Hz)
- MSO72504DX - Opt. A10 - China power plug (50 Hz)
- MSO72504DX - Opt. A11 - India power plug (50 Hz)
- MSO72504DX - Opt. A12 - Brazil power plug (60 Hz)
- MSO72504DX - Opt. A99 - No power cord
| Model | MSO72504DX |
|---|
Das Tektronix MSO72504DX ist ein Hochleistungs-Oszilloskop mit 25 GHz analoger Bandbreite, 4 analogen und 16 digitalen Kanälen sowie einer Abtastrate von 100 GS/s. Anstiegszeit beträgt 16 ps (10–90 %) und 12 ps (20–80 %).
Mit USB 2.0-Anschlüssen vorne und hinten, Ethernet-Port und Videoausgang ist es ideal für Prototyping und Produktionstests geeignet.
Testwall liefert das gebrauchte Tektronix MSO72504DX, vollständig getestet. Mit globalem Versand und Fachsupport bietet Testwall zuverlässige Messtechnik. Kontaktieren Sie uns für Reparatur oder Kalibrierung des Tektronix MSO72504DX.
