The Tekronix TCP0030 AC/DC Cur Probe is a high-performance and easy-to-use probe that enhances the bandwidth with selectable measurement ranges and also provides low-cur measurement capability and accuracy. The Tektronix TCP0030 Probe is designed specifically for those Oscilloscopes that have the TekVPI™ probe interface.Features and Specifications of the Tektronix TCP0030 AC/DC Cur Probe include:
Features:
Easy-to-use and accurate AC/DC cur measurements
Connects directly to Oscilloscopes with the TekVPI™ Probe Interface
Provides automatic units scaling and readout on the Oscilloscope display
Embeds the probe characteristics within the Oscilloscope
Fully programmable over the Oscilloscope's interface
Split-core construction allows easy circuit connection
High accuracy with typically less than 1% DC gain error
Accurately measures cur levels as low as 1 mA
Low Noise and DC Drift
Easy to degauss and autozero
Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu
Remote GPIB/USB probe control through the Oscilloscope
Safety certified for U.S. and Canada
Applications:
Power supplies
Semiconductor devices
Power inverters/converters
Electronic ballasts
Industrial/consumer electronics
Mobile communications
Motor drives
Transportation systems
Specifications:
Bandwidth: DC to ≥120 MHz
Rise time: ≤2.92 ns
Max RMS cur: 30 A
Max peak pulse cur: 50 A
Minimum sensitivity:
1 mA (on Oscilloscopes that support 1 mV/div setting)
AC Coupling (on Oscilloscopes that support AC/DC coupling)
Cur ranges: 5 A and 30 A
DC accuracy:
Typical: ±1%
Warranted: ±3%
Max amp-second product: 500 Aμs (in 30 A Range)
Insertion impedance:
1 mΩ at 10 kHz
3.5 mΩ at 100 kHz
0.08 Ω at 1 MHz
0.15 Ω at 10 MHz
0.7 Ω at 100 MHz
0.85 Ω at 120 MHz
Signal delay: 14.5 ns
Easy-to-use and accurate AC/DC cur measurements
Connects directly to Oscilloscopes with the TekVPI™ Probe Interface
Provides automatic units scaling and readout on the Oscilloscope display
Embeds the probe characteristics within the Oscilloscope
Fully programmable over the Oscilloscope's interface
Split-core construction allows easy circuit connection
High accuracy with typically less than 1% DC gain error
Accurately measures cur levels as low as 1 mA
Low Noise and DC Drift
Easy to degauss and autozero
Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access Oscilloscope UI display menu
Remote GPIB/USB probe control through the Oscilloscope
Safety certified for U.S. and Canada
Applications:
Power supplies
Semiconductor devices
Power inverters/converters
Electronic ballasts
Industrial/consumer electronics
Mobile communications
Motor drives
Transportation systems
Power supplies
Semiconductor devices
Power inverters/converters
Electronic ballasts
Industrial/consumer electronics
Mobile communications
Motor drives
Transportation systems
Bandwidth: DC to ≥120 MHz
Rise time: ≤2.92 ns
Max RMS cur: 30 A
Max peak pulse cur: 50 A
Minimum sensitivity:
1 mA (on Oscilloscopes that support 1 mV/div setting)
AC Coupling (on Oscilloscopes that support AC/DC coupling)
Cur ranges: 5 A and 30 A
DC accuracy:
Typical: ±1%
Warranted: ±3%
Max amp-second product: 500 Aμs (in 30 A Range)
Insertion impedance:
1 mΩ at 10 kHz
3.5 mΩ at 100 kHz
0.08 Ω at 1 MHz
0.15 Ω at 10 MHz
0.7 Ω at 100 MHz
0.85 Ω at 120 MHz
Signal delay: 14.5 ns
1 mA (on Oscilloscopes that support 1 mV/div setting)
AC Coupling (on Oscilloscopes that support AC/DC coupling)
Wenn Sie mit Ihrem Kauf nicht vollständig zufrieden sind, senden Sie den Artikel einfach innerhalb von 30 Tagen nach Erhalt in seinem Originalzustand an uns zurück.
Zurückgesandte Artikel müssen unbenutzt sein und in der Originalverpackung mit allen beigefügten Unterlagen zurückgeschickt werden. Nach Erhalt erstatten wir Ihnen den vollen Betrag, abzüglich der ursprünglichen Lieferkosten. Alternativ tauschen wir den Artikel gerne um, wenn Sie dies bevorzugen.
MwSt. (Mehrwertsteuer)
Die Preise verstehen sich exklusive MwSt.
Innergemeinschaftliche Transaktionen: Gemäß der EU-Mehrwertsteuerrichtlinie sind B2B-Warenverkäufe über EU-Grenzen hinweg von der MwSt. befreit.
Wenn MwSt. berechnet wird, beträgt der Satz 23 %.
Außerhalb der EU wird keine MwSt. berechnet.